home/products/7 best corner toilets for small bathrooms – sizes & rough-in
7 Best Corner Toilets for Small Bathrooms – Sizes & Rough-In
In a small bathroom, a corner toilet sits angled between two walls on a triangular tank, so the bowl's projection, round or elongated shape and a 12-inch rough-in taken from each wall decide the layout. The American Standard Triangle Cadet PRO arrives complete, slow-close seat, wax ring and installation kit included, and is rated at 1.28 gallons per flush, so only the supply line is bought separately. Where its 35-3/16 inches from the finished wall is too much, the Renovators Supply Troyt projects 30 inches from tank corner to bowl edge. A buyer who needs the WaterSense label to hold up takes the Signature Hardware Eastpointe, listed in EPA's register under its own bowl and tank codes, where Renovators Supply's WaterSense titles find no match. Clearances then settle the room: the 2021 and 2024 IRC keep a toilet's center at least 15 inches from a side wall with 21 inches clear in front, California's 2025 plumbing code asks for 24, and the locally adopted edition governs.
Review
In a small bathroom, a corner toilet sits angled between two walls on a triangular tank, so the bowl's projection, round or elongated shape and a 12-inch rough-in taken from each wall decide the layout. The American Standard Triangle Cadet PRO arrives complete, slow-close seat, wax ring and installation kit included, and is rated at 1.28 gallons per flush, so only the supply line is bought separately. Where its 35-3/16 inches from the finished wall is too much, the Renovators Supply Troyt projects 30 inches from tank corner to bowl edge. A buyer who needs the WaterSense label to hold up takes the Signature Hardware Eastpointe, listed in EPA's register under its own bowl and tank codes, where Renovators Supply's WaterSense titles find no match. Clearances then settle the room: the 2021 and 2024 IRC keep a toilet's center at least 15 inches from a side wall with 21 inches clear in front, California's 2025 plumbing code asks for 24, and the locally adopted edition governs.
Five of these seven are true corner toilets with triangular tanks, and the last two serve rooms where turning the toilet into the corner is not the answer: a compact one-piece HOROW for a free back wall and a Swiss Madison wall-hung bowl for a wall that is being opened anyway.
- American Standard Triangle Cadet PRO: Best overall, a triangular-tank corner toilet sold complete by American Standard, 1.28 gpf, 17 in high with its included seat
- Renovators Supply Sheffield Round: Best round bowl, a 0.8/1.6 gpf dual-flush corner toilet with a 32.5 in projection and a matching tank sold as a part
- Renovators Supply Sheffield Elongated: Best elongated bowl, a 17 in seat height and a 33.75 in projection, in white or black
- Renovators Supply Troyt: Best for the smallest rooms, the shortest projection a US maker states for a corner toilet, 30 in, and 17-1/4 in wide
- Signature Hardware Eastpointe: Best for water efficiency, WaterSense certified by its own tank and bowl codes, 1.28 gpf
- HOROW 8733S: Best compact alternative, a one-piece toilet for a back wall, with a 10 in rough-in version and WaterSense certification
- Swiss Madison Ivy SM-WT450: Best wall-hung alternative, a bowl on an in-wall carrier with a 0.8/1.6 gpf dual flush and a height set at installation
Compare the Best Corner Toilets
| Toilet | Best For | Bowl | Flush | Height | Rough-in | WaterSense |
|---|---|---|---|---|---|---|
| American Standard Triangle Cadet PRO | Overall | Elongated | 1.28 gpf single | 16 1/2 in rim, 17 in with seat | 12 in | Round-front combination listed by EPA |
| Renovators Supply Sheffield Round | Round bowl | Round | 0.8/1.6 gpf dual | 15 in seat, 16 in bowl, both stated | 12 in | No EPA entry, maker marks it No |
| Renovators Supply Sheffield Elongated | Elongated bowl | Elongated | 0.8/1.6 gpf dual | 17 in seat | 12 in | No EPA entry found |
| Renovators Supply Troyt | Smallest rooms | Round | 0.8/1.6 gpf dual | 16.25 in seat | 12 in | No EPA entry, maker marks it No |
| Signature Hardware Eastpointe | WaterSense | Elongated | 1.28 gpf single, EPA certified | 16-1/2 in bowl, 17-1/2 in with seat | 12 in | Listed by EPA |
| HOROW 8733S | Compact alternative | Round | 1.60/1.06 gpf, EPA | 16-1/2 in seat | 12 in or 10 in | Listed by EPA |
| Swiss Madison Ivy SM-WT450 | Wall-hung alternative | Elongated | 0.8/1.6 gpf dual | Set on the carrier | In-wall carrier | No EPA entry found |
01. American Standard Triangle Cadet PRO - Best Corner Toilet Overall
American Standard documents the Triangle Cadet PRO in full, from its dimensions and flush valve to its trapway and standards, and sells it complete from its own US store, which makes it the easiest corner model to plan a bathroom around. The elongated 609AD001.020 puts a chair-height bowl on its triangular tank and flushes a single 1.28 gallons. It arrives with a slow-close seat, a trip lever, bolt caps, a wax ring and an installation kit, so only the water supply line is bought separately. It complies with ASME A112.19.2-2008 and CSA B45.1-08, and it asks for the most floor of any corner pick here, projecting 35-3/16 inches from the finished wall, so the room has to give that depth in front of the corner.
American Standard markets the elongated model as WaterSense certified, but EPA's WaterSense register lists the same triangle tank, 4189D, only in a round-front combination, 216BD104, at 1.28 gallons single flush, with no entry found under the elongated codes. That round-front version, the 216BD104.020, is trade-exclusive in the United States, and in Canada the elongated and the round-front are trade-exclusive and the tank alone has no online sale. Its parts, at least, are ordinary: the seat is American Standard's standard elongated slow-close model, #5321.110, so a replacement is easy to find, and white is the only finish. A buyer who needs the certification on the exact model should take the Eastpointe, and a room that cannot spare the depth should take the 30-inch Troyt.
What We Like
- Sold complete by its maker
- 1.28 gpf single flush, 4.8 L
- 17 in high with the included seat
- Seat, wax ring and install kit included
- 3-in flush valve, 2 1/8-in glazed trapway
What We Don't Like
- White only
- Only the round-front combination is WaterSense certified
- Round-front version sold to the trade only
02. Renovators Supply Sheffield Round - Best Round Corner Toilet
A round bowl on a triangular tank holds the Renovators Supply Sheffield Round to a 32.5-inch projection, which leaves more floor in front of it than either elongated corner pick, and it is in stock at its maker as well as offered on Amazon, with a push-button dual flush. Renovators Supply advises against roughing in the drain before the toilet is on site, because its products vary slightly. Its published dimensions also differ among themselves: a 15-inch seat height against a 16-inch bowl height, widths of 18.5 and 19.00 inches, and a 32.00-inch length beside the 32.5-inch projection.
The product title claims WaterSense while its specifications mark it not certified, and EPA's WaterSense register has no Renovators Supply brand and no entry for Sheffield or its item number. Renovators Supply also markets it as cUPC, ADA and ANSI compliant, yet its 15-inch seat and 16-inch bowl height fall short of the 17 to 19 inches the 2010 ADA Standards set in 604.4, and sit only inside the 15 to 19 inches they permit in residential dwelling units. Renovators Supply also says the dual flush can save up to 25,000 gallons of water a year, crediting EPA, while EPA's own estimate for replacing old, inefficient toilets with WaterSense labeled models is nearly 13,000 gallons a year for a home.
A seat comes with it, but the floor bolts, bolt covers and wax ring do not, and the dual flush is gravity-fed. The Sheffields look good, install easily and are good value, and the dual flush works, though fit is a mixed experience and seat stability and the quality of the plastic are recurring complaints. For a standard bathroom it is the round-bowl corner toilet to buy, item 13762 in white, and its corner tank, item 13747, is sold on its own. A room with a little more depth to give should take the elongated Sheffield and its single stated 17-inch seat height.
What We Like
- Round bowl on a corner tank
- 0.8/1.6 gpf push-button dual flush
- In stock at its maker
- Replacement corner tank sold separately
- Slow-close seat included
What We Don't Like
- Stated heights differ, 15 in seat and 16 in bowl
- WaterSense claim contradicted by its own specifications
- Floor bolts, caps and wax ring not included
03. Renovators Supply Sheffield Elongated - Best Elongated Corner Toilet
Where the round Sheffield states two heights, the Renovators Supply Sheffield Elongated states one, 17 inches for seat and bowl alike, so the figure a buyer plans the room around is unambiguous, and it sets that height over an elongated bowl on the same kind of triangular tank. It comes in white as item 10688 or black as item 27783, and both finishes share the same dimensions and the same 0.8 and 1.6 gallon dual flush.
Against the round model it trades a little depth for the longer bowl, 33.75 inches of projection against 32.5, so it belongs in a room that has that space to give. The white model is marketed as WaterSense and the black one is not, and EPA's WaterSense register holds no Renovators Supply toilet under any name. Floor bolts, bolt covers and the wax ring are not included, but Renovators Supply sells its Sheffield corner tanks separately, a black one as item 21831, which keeps an odd-shaped tank replaceable years after the purchase, and it ships to Canada as well as within the US.
What We Like
- 17 in seat height, one stated figure
- Elongated bowl
- White or black finish
- In stock in both finishes
- Corner tank sold as a replacement part
What We Don't Like
- Longer projection than the round Sheffield and Troyt, 33.75 in
- WaterSense claimed for one finish, no EPA entry found
- Floor bolts, caps and wax ring not included
04. Renovators Supply Troyt - Best Small Corner Toilet
The Renovators Supply Troyt has the shortest projection any maker states for a corner toilet sold from its own US store, 30 inches from the tank corner to the bowl edge, and it is also the narrowest and lowest of them. This round-bowl, two-piece corner toilet is in stock at Renovators Supply as item 17668. Its compact body sits lower too, with a stated seat height of 16.25 inches and a 14-7/8-inch bowl, both under the elongated Sheffield's 17 inches, so it is built for a compact room more than for a tall user, who is better off with the elongated Sheffield where the room allows.
Renovators Supply sells the Troyt tank, item 22424, and its bowl, item 22423, as separate parts, so a cracked tank does not mean a new toilet. It is marketed as WaterSense while its specifications mark it not certified, EPA's register holds no Renovators Supply toilet, and it is marked ADA compliant though its 16.25-inch seat falls short of the 17 to 19 inches the 2010 ADA Standards set in 604.4 and sits only inside the 15 to 19 inches they permit in residential dwelling units. For a powder room or a cottage bathroom where every inch of projection counts, it is still the one to buy, sold by Renovators Supply from its own store, with no Amazon offer found.
What We Like
- Shortest corner projection a US maker states, 30 in
- Narrowest corner pick, 17-1/4 in
- Lowest corner pick, 29 in overall
- Dual flush 0.8/1.6 gpf
- Tank and bowl sold separately
What We Don't Like
- Marked not WaterSense certified
- 16.25 in seat, under the ADA 17 to 19 in
- Not found on Amazon
05. Signature Hardware Eastpointe - Best WaterSense Corner Toilet
The Signature Hardware Eastpointe is the one pick WaterSense certified under its own tank and bowl codes, its SHBD240 bowl and SH111001WHT corner tank listed together at a single 1.28-gallon flush. It is a vitreous china two-piece with an elongated bowl, a 2-inch trapway and a 9 by 7 inch water spot, certified to ASME A112.19.2 and CSA B45.1, ICC A117.1 and WaterSense by IAPMO. A chrome button on top of the tank lid offers two flushing options that release different quantities, though the certified rating is a single 1.28-gallon flush.
Its installation instructions make the corner drain easy to place: measure the rough-in out from the finished corner along each wall, draw two perpendicular lines, and the drain sits where they cross. Its stated width of 17-3/8 inches sits against a 32-7/8-inch projection from the corner, though its retail figures give 32-7/8 inches for both depth and width. Signature Hardware sells it with no seat, a standard seat or a bidet seat, from its own store, with no Amazon offer found. Anyone who wants the seat in the box and American Standard's parts behind the toilet should take the Triangle Cadet PRO instead. The Eastpointe earns its place when the certification has to be on the exact model.
What We Like
- WaterSense certified by its own tank and bowl codes
- 1.28 gpf, 4.8 L, single flush, EPA certified
- Bidet seat option
- 3-in flush valve
- Clear corner rough-in instructions
What We Don't Like
- Retail figures give 32-7/8 in for depth and width
- Not found on Amazon
- Seat sold as an option
06. HOROW 8733S - Best Compact Alternative to a Corner Toilet
The HOROW 8733S fits the many rooms that send buyers looking for a corner model yet can take a small one-piece toilet against the back wall instead, compact enough for them and offered in a 10-inch rough-in version, the 8733-10, for drains set close to the wall. Its flush ratings differ by source: the HWMT-8733 series' WaterSense certification gives 1.60 gallons full and 1.06 gallons reduced, 6.1 and 4.0 liters, which qualifies under Version 1.2 of the WaterSense specification by averaging two reduced flushes with one full flush, while HOROW's own figure is 0.8 and 1.28 gallons.
The Amazon offer carries the series code HWMT-8733, and the flush is fully glazed with a self-cleaning spray, and the included supply line adapter connects directly to G1/2 supply lines and screws off for 7/8-inch lines. A compact toilet like this can also go into the corner itself, set there with a full or half wall built behind it at 45 degrees, an old workaround suggested as a hedge against a corner model that flushes poorly. Where a room has a free stretch of back wall, a compact one-piece is the simpler fixture to buy, fit and clean, though its tank and bowl replace together.
What We Like
- 10 in rough-in version for close drains
- EPA WaterSense listed, 1.60/1.06 gpf
- One-piece build
- Round bowl and slow-close seat
- Sold by its maker and on Amazon
What We Don't Like
- Not a corner toilet, needs a back wall
- One-piece, so tank and bowl replace together
- Flush ratings differ, 0.8/1.28 or 1.60/1.06 gpf
07. Swiss Madison Ivy SM-WT450 - Best Wall-Hung Alternative to a Corner Toilet
With its tank in an in-wall carrier, the Swiss Madison Ivy SM-WT450 takes the tank's depth out of the room altogether, which a corner model's triangular tank cannot do. Its elongated wall-hung bowl is a durable, non-porous, scratch-resistant ceramic with a dual flush, and the floor beneath it stays clear. Its height is set at installation by adjusting the carrier's legs, giving a standard-height toilet of 15 to 17 inches.
The bowl is one part of a three-part purchase, because the carrier tank system and the actuator flush button are sold separately, and fitting the carrier means opening a wall. EPA's WaterSense register has no entry for the WT450. That makes it the toilet for a renovation that is opening the wall anyway, where hiding the tank saves more depth than turning the toilet to the corner, while a bathroom whose walls stay closed is the place for the HOROW 8733S or a corner model.
What We Like
- Tank hidden in the wall
- Height adjusted on the carrier
- 0.8/1.6 gpf dual flush
- Elongated bowl
- Floor clear beneath the bowl
What We Don't Like
- Not a corner toilet
- Carrier and actuator sold separately
- No EPA WaterSense entry found
Benefits of Corner Toilets
A corner toilet's design puts the toilet into the corner itself, and the space saving comes from that position in the bathroom layout more than from the fixture's size, since the makers' figures for depth run 30 to 35-3/16 inches. The makers sell it on that placement, American Standard presenting the Triangle Cadet PRO as a corner fit with powerful performance in limited space and Signature Hardware citing the square footage a corner configuration conserves. A toilet with a wedge-shaped tank that fits a corner is a long-standing homeowner request, and it is still the one these models answer.
Types of Corner Toilets
Wall-Mounted Corner Toilets
Wall-mounted toilets hang a standard bowl from an in-wall carrier with the tank inside the wall, as on the Swiss Madison Ivy, whose carrier tank system and actuator flush button are bought separately from the bowl and whose height is set at installation on the carrier's legs. Every corner model here is a floor-mounted toilet, so a wall-hung bowl goes on a straight wall, where the tank's depth disappears into the wall instead of into a corner.
Two-Piece Corner Toilets
The corner toilets American Standard, Renovators Supply and Signature Hardware sell are two-piece, a separate triangular tank bolted to the bowl, as on the Triangle Cadet PRO, the Sheffield, the Troyt and the Eastpointe. In the UK the same arrangement is a corner WC, a floor-standing close-coupled pan with a corner cistern, such as Ideal Standard's i.life S E2493, 6 liters with a 4-liter secondary flush, 365 mm wide, 290 mm deep and 390 mm high.
One-Piece Corner Toilets
A one-piece toilet has its tank and bowl made as one fixture. The US makers' corner toilets are all two-piece, and Swiss Madison, Kohler and Barclay offer no corner toilet, so a buyer who wants a one-piece in a small room is choosing a compact model such as the HOROW 8733S against a back wall.
Factors to Consider When Choosing the Best Corner Toilet
Rough-In Measured From Each Wall
A corner toilet's rough-in is measured out from the finished corner along each wall, 12 inches, 305 mm, on both walls for the Renovators Supply and Signature Hardware models, and the drain sits where two perpendicular lines drawn from those marks cross. Renovators Supply also advises waiting for the toilet before roughing in, because products vary slightly.
Installation and What Comes in the Box
A standard toilet's 12-inch rough-in is one measurement from the wall behind it, and the 2021 and 2024 International Residential Code put its center at least 15 inches from a side wall, while a corner toilet's drain sits 12 inches out from each of two walls, so on those figures a corner toilet does not drop onto a standard toilet's drain. American Standard notes that certain installations may require professional help and that installation must conform to local codes.
What comes with the toilet differs by maker. The Triangle Cadet PRO ships with a slow-close seat, a wax ring and an installation kit and leaves only the supply line to the buyer, while the Sheffield leaves out floor bolts, bolt covers and the wax ring. The Eastpointe is sold with no seat, a standard seat or a bidet seat, and the Ivy needs its in-wall carrier and actuator bought separately before the bowl can go on the wall.
Clearances Set by the Plumbing Code
The plumbing codes, which call a toilet a water closet, set its clearances from its center, 15 inches to any side wall and 21 inches in front under the 2021 and 2024 International Residential Code and the 2021 International Plumbing Code, and 24 inches in front under the 2025 California Plumbing Code. They measure from the center to a side wall and describe no diagonal placement, so how the side rule reads for a toilet turned into a corner is the local inspector's call, and the edition the jurisdiction has adopted decides which numbers apply.
| Code | Section | Center to side wall | Clear in front |
|---|---|---|---|
| IRC 2021 | R307.1 and P2705.1 | 15 in, 381 mm | 21 in, 533 mm |
| IRC 2024 | R327.1 and P2705.1 | 15 in, 381 mm | 21 in, 533 mm |
| IPC 2021 | 405.3.1 | 15 in, 381 mm | 21 in, 533 mm |
| California Plumbing Code 2025 | 402.5 | 15 in, 381 mm | 24 in, 610 mm |
Local adoption decides which edition governs. The 2024 IRC moved the space rule from R307 to R327 with the same clearances.
Water Use and the WaterSense Label
WaterSense labeled toilets use 1.28 gallons per flush or less, 20 percent less than the 1.6-gallon federal standard, and under Version 1.2 of the WaterSense specification a dual-flush toilet's effective volume is the average of two reduced flushes and one full flush. As of October 2026, EPA has paused Version 2.0 and keeps Version 1.2 in effect until further notice, and Version 2.0 would hold the full flush of a dual-flush toilet to 1.28 gallons.
By EPA's estimate, replacing old, inefficient toilets with WaterSense labeled models can cut the water an average family uses for toilets by 20 to 60 percent, nearly 13,000 gallons a year for a home, and such a family could also save on water costs. EPA's WaterSense register is the check on a maker's claim, and it covers the Eastpointe, the round-front Triangle Cadet PRO combination and the HOROW 8733 series, with no Renovators Supply or Swiss Madison toilet.
Seat Height and the ADA
The 2010 ADA Standards set a seat height of 17 to 19 inches to the top of the seat, or 15 to 19 inches in residential dwelling units, and a centerline 16 to 18 inches from a side wall, with a wall behind and to one side, and they do not cover the part of a private home used only as a residence. Measured that way, the corner picks sit at different heights: the Eastpointe at 17-1/2 inches with a seat, the Triangle Cadet PRO with its seat and the elongated Sheffield at 17 inches, and the Troyt's seat at 16.25, inside only the residential range.
Round or Elongated Bowl
A round bowl shortens the projection: the round Sheffield reaches 32.5 inches against 33.75 for the elongated Sheffield, and the Troyt's round bowl gives the shortest projection of the US makers' corner toilets, 30 inches. The Triangle Cadet PRO and the Eastpointe are elongated, and the Triangle Cadet PRO's round-front version is sold through the trade, so among these picks a round corner bowl bought at retail means a Renovators Supply model, the round Sheffield or the Troyt.
Material and Finish
The Triangle Cadet PRO, the round Sheffield and the Eastpointe are vitreous china, the Triangle Cadet PRO to ASME A112.19.2-2008 and CSA B45.1-08 for vitreous china fixtures and the round Sheffield as Grade A vitreous china porcelain. The round Sheffield's Reno-Gloss finish is made to resist stains, and Swiss Madison makes the Ivy in a durable, non-porous, scratch-resistant ceramic.
Related Articles
Best Bidet Converter Kits for Smart Homes & Sustainable Bathrooms
Best Kohler Toilets for Modern Bathrooms
Best Toilet Seats for Modern Bathrooms
Kohler vs American Standard Toilets
What is the best corner toilet?
The best corner toilet is the American Standard Triangle Cadet PRO, a triangular-tank elongated model sold by American Standard directly, rated 1.28 gallons per single flush and 17 inches high with its included seat. The Renovators Supply Troyt is the pick for the smallest rooms, with the shortest corner-toilet projection a US maker states, 30 inches, and the Signature Hardware Eastpointe is WaterSense certified under its own tank and bowl codes.
What is a corner toilet?
A corner toilet is a toilet that mounts in the corner where two walls meet, with a triangular tank shaped to fit it, so the bowl points out along the diagonal of the room. The corner models American Standard, Renovators Supply and Signature Hardware sell are two-piece toilets with a separate tank, and their rough-in is measured out from each wall, 12 inches on these models, with the drain where the two measurements cross.
Do corner toilets save space?
Corner toilets save space by using the corner itself, which makes them a space saver by position more than by size, since their makers' figures for depth run 30 to 35-3/16 inches. In a room with a free back wall, a compact standard toilet can take less depth, the HOROW 8733S measuring 25 inches deep, so the corner model earns its place where the back wall is taken by a door, a window or a vanity.
Which brands make corner toilets?
The brands that make corner toilets and sell them from their own US stores are American Standard with the Triangle Cadet PRO, Renovators Supply with the Sheffield and Troyt, and Signature Hardware with the Eastpointe, and Amazon carries further triangular-tank models from marketplace sellers such as SUPERFLO and Los Flexi. Kohler offers no corner model, and Barclay makes corner basins and lavatories but no corner toilet, so a buyer who asks for those brands' corner toilets is offered none.
Where can you buy a corner toilet in Canada?
In Canada, you can buy a corner toilet through American Standard's dealers or from Renovators Supply, which also ships to Canada. In Canada American Standard sells the Triangle Cadet PRO elongated and round-front as trade-exclusive toilets, with no online sale for them or for the triangle tank, and Renovators Supply markets its round Sheffield as cUPC, IAPMO's mark for products that meet American and Canadian codes and standards.
Do corner toilets take a standard toilet seat?
The corner toilets from Renovators Supply and American Standard take a standard toilet seat from each maker's own round or elongated range, Renovators Supply pointing buyers to its round and elongated slow-close seats and American Standard to its EverClean elongated seat #5321.110. The odd part is the triangular tank, which Renovators Supply sells on its own and American Standard Canada lists on its own, with no online sale.
Article by Aida Vasquez for Architecture Lab · Published 17 March 2021 · Updated 20 October 2026
More Product Reviews

Topdon TC002C Review for Building Diagnostics: Specs, Field Tests, Alternatives

HIKMICRO B10S Review for Building Diagnostics: Specs, Field Tests, Alternatives

5 Best Fiber Laser Engravers and Cutters for Precision Work









