home/products/8 best utility sink faucets – sprayer, hose thread & 4-inch fit
8 Best Utility Sink Faucets – Sprayer, Hose Thread & 4-Inch Fit
A utility sink faucet in a laundry room, mudroom, garage or workshop fills buckets, rinses the basin and feeds a garden hose, so flow, a sprayer and a threaded hose outlet decide which one belongs there. The Moen Arbor 4736 covers the most of that work at 4.0 gpm, as the one pick that pairs a pull-down sprayhead with a threaded garden hose outlet. A sink drilled on 4-inch centers is better matched by the Kohler Simplice K-22035 and its two-function pull-out sprayhead, and a hose-first laundry tub by the Kohler Jolt K-30619 and its 3/4-inch GHT swing spout, both rated at 4.0 gpm at 20 psi. The Kraus and WEWE kitchen pull-downs run at 1.8 gpm, under the federal cap of 2.2 gpm at 60 psi for lavatory and kitchen faucets. Past flow, the choice turns on the holes already drilled in the deck, how far the spout swings and whether a hose left on the spout falls under the plumbing code's vacuum-breaker rule.
Review
A utility sink faucet in a laundry room, mudroom, garage or workshop fills buckets, rinses the basin and feeds a garden hose, so flow, a sprayer and a threaded hose outlet decide which one belongs there. The Moen Arbor 4736 covers the most of that work at 4.0 gpm, as the one pick that pairs a pull-down sprayhead with a threaded garden hose outlet. A sink drilled on 4-inch centers is better matched by the Kohler Simplice K-22035 and its two-function pull-out sprayhead, and a hose-first laundry tub by the Kohler Jolt K-30619 and its 3/4-inch GHT swing spout, both rated at 4.0 gpm at 20 psi. The Kraus and WEWE kitchen pull-downs run at 1.8 gpm, under the federal cap of 2.2 gpm at 60 psi for lavatory and kitchen faucets. Past flow, the choice turns on the holes already drilled in the deck, how far the spout swings and whether a hose left on the spout falls under the plumbing code's vacuum-breaker rule.
Here are the eight top picks in the order they are reviewed:
- Moen Arbor 4736: Best overall, a pull-down laundry faucet with a threaded garden hose outlet, a 68 in hose and a 4.0 gpm flow rate
- Kohler Simplice K-22035: Best pull-out, a two-function sprayhead at 4.0 gpm for three holes on 4 in centers or a single hole
- Kohler Jolt K-30619: Best for a hose, a two-handle faucet with a 3/4 in GHT swing spout, 4.0 gpm and both NSF listings
- Delta 2131LF: Best solid brass build, a two-handle laundry faucet with a hose-thread spout that swings 360° and a 2 or 3-hole 4 in fit
- American Standard Colony PRO 7074240.002: Best documented lead content, a two-handle centerset with a 360° brass spout, a hose end and NSF 61 and NSF 372 listings
- Moen Chateau 74998: Best for two holes on 4 in centers, a low-arc two-handle faucet with a limited lifetime warranty for the homeowner
- Kraus KPF-1610SS: Best commercial-style look, an open-coil pull-down kitchen faucet sized for any kitchen or laundry room
- WEWE High-Arc Pull-Down A1001-02-01BN: Best three-mode sprayer, a brushed nickel pull-down with stream, spray and pause and a 20 in pull-down reach
Compare the Best Utility Sink Faucets
| Faucet | Best For | Type | Flow Rate | Hose Outlet |
|---|---|---|---|---|
| Moen Arbor 4736 | Laundry rooms | Pull-down | 4.0 gpm max | Garden hose thread |
| Kohler Simplice K-22035 | 4-inch utility sinks | Pull-out | 4.0 gpm max at 20 psi | None stated |
| Kohler Jolt K-30619 | Hose connection | Two-handle, GHT spout | 4.0 gpm min at 20 psi | 3/4 in GHT |
| Delta 2131LF | Solid brass | Two-handle, hose thread | Published as 7.5, 2.2 or 1.8 GPM | 3/4-11.5 NH |
| American Standard Colony PRO 7074240.002 | Documented lead content | Two-handle, hose end | 1.5 gpm max | Hose end, size not stated |
| Moen Chateau 74998 | Two-hole utility sinks | Two-handle, low arc | Rated Unrestricted | Not specified |
| Kraus KPF-1610SS | Commercial-style look | Pull-down kitchen | 1.8 gpm | None stated |
| WEWE High-Arc Pull-Down A1001-02-01BN | Three spray modes | Pull-down kitchen | 1.8 gpm | None stated |
01. Moen Arbor 4736 - Best Utility Sink Faucet with Sprayer Overall
The Moen Arbor 4736 best serves a laundry room that wants one faucet to rinse, spray and take a garden hose, as the only faucet here with a pull-down sprayer and a threaded garden hose outlet together. Moen sells it direct as a deck-mount laundry faucet with a 4.0 gpm flow rate, 15 L/min, maximum, so buckets fill quickly, and its 68-inch hose extends the sprayhead's reach within the sink while the hose thread takes a garden hose for the work outside it.
At 9.72 inches, the spout leaves room to stand a tall bucket under it. The faucet mounts through a single hole on a deck up to 1-1/2 inches, 38 mm, thick, though it is rated for one- to three-hole applications. A 35mm ceramic cartridge sits behind a lever handle that travels a 90-degree arc, and the supply side is 3/8-inch compression fittings on flexible supply lines.
Third-party certification stops at ASME A112.18.1/CSA B125.1, and Moen publishes no NSF/ANSI 61 or 372 certification and no lead-free statement for it, so a buyer who wants those listings on a sprayer faucet can look instead to the Kohler Simplice K-22035. Chrome is the only finish, and the warranty terms differ by document, 5 years direct from Moen, five years in a commercial installation and Moen's Limited Lifetime Warranty in retail descriptions.
What We Like
- Threaded garden hose outlet
- 4.0 gpm, 15 L/min, maximum
- 68 in pull-down hose
- One-hole mount, 1-1/4 to 1-1/2 in
- Sold by Moen as a laundry faucet
What We Don't Like
- No published NSF/ANSI 61 or 372 certification
- Chrome only
- Warranty stated as 5 years or lifetime
02. Kohler Simplice K-22035 - Best Pull-Out Faucet for a 4-Inch Utility Sink
Kohler lists the Simplice K-22035 to NSF/ANSI/CAN 61 and NSF/ANSI/CAN 372, two listings Moen does not publish for the Arbor 4736, and sizes it for a utility sink drilled with three holes on 4-inch centers. Its two-function pull-out sprayhead switches by touch control from an aerated stream to Kohler's Sweep spray, and at 4.0 gpm, 15.1 lpm, maximum flow at 20 psi it is a fast flow that quickly fills basins and buckets. Kohler sells this deck-mount laundry sink faucet direct in the US.
It ships with the parts for a single-hole installation too, so a one-hole sink takes it as well. The spout extends reach well beyond the sink, though Kohler publishes no reach figure, and Kohler classes the sprayhead as pull-out, while retail descriptions call the faucet pull-down. It is also listed to ASME A112.18.1/CSA B125.1, with ceramic disc valves, and Kohler finishes it in Polished Chrome, Matte Black and its own stainless and Brushed Moderne Brass finishes.
With no garden hose thread specified, the Simplice sprays and fills but feeds no hose, and its 120-degree rotation covers less of the basin than the 360-degree spouts on the Delta 2131LF and the American Standard Colony PRO. Where a hose at the sink is wanted alongside the sprayer, the Kohler Jolt K-30619 on the same 4-inch centers is the alternative, with its 3/4-inch GHT swing spout.
What We Like
- Two-function pull-out sprayhead
- 4.0 gpm max at 20 psi
- Three holes on 4 in centers or one hole
- NSF/ANSI/CAN 61 and 372 listed
- Four finishes
What We Don't Like
- No hose thread specified
- No published spout reach
- Spout rotation limited to 120°
03. Kohler Jolt K-30619 - Best Utility Sink Faucet with Hose Connection
Kohler builds the Jolt K-30619 around a garden hose at the sink, with a threaded swing spout that ends in a 3/4-inch, 19 mm, GHT outlet for a garden hose or other accessory. Kohler rates it at a 4.0 gpm, 15.1 lpm, minimum flow rate at 20 psi, a floor where the Simplice and Arbor figures are maximums, so at the same pressure it fills a bucket at least as fast as the Simplice.
Kohler sells it direct in the US as a deck-mount laundry and utility sink faucet, built as a durable faucet for household cleaning in a laundry room or utility area, and its 7-inch, 178 mm, spout reach puts the hose outlet well out over the basin. IAPMO certifies it to the same NSF/ANSI/CAN 61 and NSF/ANSI/CAN 372 drinking-water listings as the Simplice, alongside ASME A112.18.1/CSA B125.1, and it carries the KOHLER Faucet Lifetime Limited Warranty.
With no sprayhead, only the threaded swing spout, and a fit for three holes on 4-inch centers alone, the Jolt leaves a single-hole sink to the Moen Arbor 4736, which brings the sprayer as well. Retail descriptions of the same 30619-CP call it a widespread kitchen faucet, but Kohler sells it as a laundry and utility sink faucet.
What We Like
- 3/4 in, 19 mm, GHT hose outlet
- 4.0 gpm min at 20 psi
- 7 in, 178 mm, spout reach
- NSF/ANSI/CAN 61 and 372 listed
- Lifetime Limited Warranty
What We Don't Like
- Threaded swing spout, no sprayhead
- Three holes on 4 in centers only
- Also sold as a kitchen faucet
04. Delta 2131LF - Best Solid-Brass Laundry Faucet
Solid brass is the reason to choose the Delta 2131LF, a deck-mount two-handle laundry faucet complete with hose thread, and its spout swings a full 360 degrees, as the American Standard Colony PRO and the WEWE do, so the outlet reaches every side of the tub. It is part of Delta's laundry range and sold through retailers, and it carries a lifetime faucet and finish limited warranty to the original consumer purchaser, with a separate limited warranty for industrial, commercial and business use.
The 2131LF replaced model 2131 as the version compliant with lead legislation, and the build stays plain, with blade handles and hot and cold stems that interchange. It fits either a 2- or a 3-hole sink on 4-inch centers, on a deck up to 1 inch, 25 mm, thick, and the spout outlet carries a 3/4-11.5 NH hose thread.
Its flow rate is unsettled, at 7.5 GPM at 60 PSI from Delta, 2.2 GPM from a plumbing distributor and 1.8 gpm in retail descriptions, with the specification showing flow only as a pressure graph. The faucet also has no connection for a side sprayer, so a laundry room that wants spray at the tub is better off with the Moen Arbor 4736 or the Kohler Simplice K-22035.
What We Like
- Lifetime faucet and finish limited warranty
- Hose-thread spout, 3/4-11.5 NH
- Spout swings 360°
- Solid brass construction
- Fits 2 or 3 holes on 4 in centers
What We Don't Like
- No sprayer connection
- Published flow varies, 7.5, 2.2 or 1.8 GPM
- Rated flow shown only as a pressure graph
05. American Standard Colony PRO 7074240.002 - Best Laundry Faucet with a Stated Lead Content
The American Standard Colony PRO 7074240.002 carries the most specific lead statement among the picks, a stated 0.25 percent or less total lead content by weighted average, backed by listings to NSF 61/Section 9 and NSF 372, so it is the faucet for a buyer who wants lead content in writing. It is a deck-mount two-handle centerset laundry sink faucet whose brass swivel spout turns 360 degrees and ends in a hose end, and American Standard sells it through retailers.
Quarter-turn washerless ceramic disc valve cartridges sit under the lever handles, so there is no washer to wear. The one-half inch male inlet shanks go through two mounting holes on 4-inch, 102 mm, centers, though American Standard also describes it as a 3-hole mount, so the sink's hole count is the thing to confirm before ordering. It is also listed to ANSI A117.1, ASME A112.18.1 and CSA B125.1, and it comes with a limited lifetime warranty.
The hose-end model is rated at a maximum flow of 1.5 gallons per minute, 5.7 L/min, the lowest figure among the picks, and its hose thread size is not stated. An order for the hose end has to name 7074240.002, since 7074140.002 is its aerator-end sibling. For more flow at a hose thread, the Kohler Jolt K-30619 is rated at a minimum of 4.0 gpm at 20 psi.
What We Like
- 0.25% or less total lead by weighted average
- NSF 61 and NSF 372 listed
- Brass swivel spout, 360°
- Hose end
- Limited lifetime warranty
What We Don't Like
- 1.5 gpm maximum flow rate
- Not sold direct by American Standard
- Hose thread size not stated
06. Moen Chateau 74998 - Best Two-Hole Laundry Faucet
A low arc defines the Moen Chateau 74998, a plain two-handle faucet for a utility sink drilled with two holes on 4-inch centers. Its 6.63-inch spout height leaves less room under the spout for a tall bucket than the 9.72-inch spout of the Moen Arbor 4736, which counts at a sink used mostly for filling. It installs through two 1-inch minimum holes in a deck up to 3/4 inch, 19 mm, thick, the thinnest deck limit among the picks that state one, so a thick sink deck needs measuring first.
Moen sells it direct as a deck-mount laundry faucet with an aerated stream, its water usage rated Unrestricted, and backs it with a limited lifetime warranty to the original homeowner and five years in a commercial installation. It runs on the 1224 cartridge, and it is designed to CSA B-125 and ASME A112.18.1M.
There is no sprayer, and the hose question is open. Retail descriptions call the spout threaded and give 2 gpm, while Moen specifies neither a hose thread nor a gpm figure, so a two-hole sink that needs a hose connection is on firmer ground with the American Standard Colony PRO, which American Standard specifies with a hose end on 4-inch centers.
What We Like
- Two-hole mount on 4 in centers
- Limited lifetime warranty for the homeowner
- 1/2 in IPS connections
- Low arc, 6.63 in spout height
- Sold direct by Moen
What We Don't Like
- No sprayer
- Hose thread not specified
- Short 5.44 in spout reach
07. Kraus KPF-1610SS - Best Commercial-Style Pull-Down
The Kraus KPF-1610SS brings a commercial-style look to a laundry sink, a high-arc open-coil spring spout on a deck-mount single-handle pull-down that Kraus sizes to fit any kitchen or laundry room at 18 3/4 inches overall. It is a kitchen faucet, though, and its aerator is rated at 1.8 gpm, under the federal limit of 2.2 gpm at 60 psi for kitchen faucets, against 4.0 gpm for the Moen Arbor 4736 and 4.0 gpm at 20 psi for the Kohler Simplice and Jolt. That makes it the faucet for a sink used for rinsing more than for filling, where the look is part of the brief.
With about 16 inches of hose reach after installation and a 180-degree swivel, it covers a smaller arc of a deep laundry tub than the WEWE pull-down. It installs in a single hole with pre-attached water lines, a quick connect hose, a counterweight and mounting hardware, or in three holes with the DP02 deck plate sold separately, and the single handle operates with 90 degrees of forward rotation for tighter spaces with no backsplash clearance.
The body is heavy-duty metal, described as brass in retail descriptions, with a ceramic cartridge and durable nylon water lines, in a stainless steel finish, and Kraus offers the same faucet in other finishes, among them chrome, matte black, brushed brass and spot free stainless steel. Its cUPC certification to ASME A112.18.1/CSA B125.1 and IAPMO certification to NSF/ANSI Standard 61 and 372 match the Kohlers on paper, and all Kraus faucets comply with lead-free legislation. No hose outlet is stated, and Kraus ships it within the continental U.S. only.
What We Like
- Sized for any kitchen or laundry room
- Open-coil pull-down spout
- 8 5/8 in spout reach
- NSF/ANSI 61 and 372 by IAPMO
- Single-hole install with counterweight
What We Don't Like
- 1.8 gpm kitchen flow rate
- No hose outlet stated
- Ships within the continental U.S. only
08. WEWE High-Arc Pull-Down A1001-02-01BN - Best Three-Mode Sprayer
The WEWE High-Arc Pull-Down Kitchen Faucet has the most spray settings among the picks, a 3-mode sprayer with stream for filling, spray for rinsing and pause to avoid splashing in multitask mode, so it belongs over a laundry sink used mostly for rinsing. It is a deck-mount single-handle kitchen faucet that WEWE sells direct in brushed nickel and retail sells as model A1001-02-01BN, with Aonecer named as the manufacturer.
Like the Kraus, it is CEC listed at 1.8 gallons per minute, against 4.0 gpm for the Moen Arbor 4736 and 4.0 gpm at 20 psi for the Kohler Simplice and Jolt. The 20-inch pull-down reach and 360-degree swivel carry the spray around the basin, a gravity ball system secures the sprayer's retraction after use, and soft silicone nozzles, SUS 304 and a ceramic cartridge make up the build, under a tulip-shaped spout.
Its single handle controls water temperature and flow volume, and the pull-down hose and water line hose come preinstalled for a DIY installation in less than 15 minutes with no plumber, in 1 or 3 holes. A cloth is enough to clean the faucet in daily use. No hose outlet is stated, so a laundry room that wants a hose and a sprayer on one faucet should look to the Moen Arbor 4736.
What We Like
- Stream, spray and pause modes
- 20 in pull-down reach
- 360° swivel
- 1- or 3-hole fit
- Sold direct by WEWE
What We Don't Like
- 1.8 gpm kitchen flow rate
- No hose outlet stated
- Sold as a kitchen faucet
Best Utility Sink Faucets Comparison Table
| Faucet | Holes and centers | Max deck | Spout | Standards listed |
|---|---|---|---|---|
| Moen Arbor 4736 | 1 hole, 1-1/4 to 1-1/2 in, 32 to 38 mm | 1-1/2 in, 38 mm | Pull-down, 9.72 in high, 8.30 in reach | ASME A112.18.1/CSA B125.1 |
| Kohler Simplice K-22035 | 3 holes on 4 in centers, or 1 hole | Not stated | Pull-out, 120° rotation | ASME/CSA, NSF/ANSI/CAN 61 and 372 |
| Kohler Jolt K-30619 | 3 holes, 4 in, 102 mm centers | Not stated | Swing spout, 7 in, 178 mm reach | ASME/CSA, NSF/ANSI/CAN 61 and 372 |
| Delta 2131LF | 2 or 3 holes, 4 in, 102 mm centers | 1 in, 25 mm | Swings 360°, hose thread | Not stated |
| American Standard Colony PRO 7074240.002 | 2 holes, 35 to 38 mm, 4 in, 102 mm centers | Not stated | Brass swivel, 360°, hose end | ASME, CSA, NSF 61, NSF 372 |
| Moen Chateau 74998 | 2 holes, 1 in min, 4 in centers | 3/4 in, 19 mm | Low arc, 6.63 in high, 5.44 in reach | CSA B-125, ASME A112.18.1M |
| Kraus KPF-1610SS | 1 hole, or 3 with the DP02 deck plate | Not stated | Pull-down, 6 1/4 in high, 8 5/8 in reach | cUPC, NSF/ANSI 61 and 372 |
| WEWE A1001-02-01BN | 1 or 3 holes, deck plate included | Not stated | Pull-down, 20 in reach, 360° swivel | CEC listed |
Maker figures, with metric where the maker gives it.
Buying Guide for the Best Utility Sink Faucet
Utility sink faucets with sprayer are deck-mount faucets for laundry rooms and utility sinks with a pull-down or pull-out sprayhead, and Moen, Kohler, Delta and American Standard each make laundry faucets, from the Moen Arbor 4736 and the Kohler Simplice K-22035 to two-handle models with hose-thread spouts such as the Kohler Jolt K-30619, the Delta 2131LF and the American Standard Colony PRO.
A laundry sink or utility tub faucet in a laundry room, mudroom, garage or workshop spends its days rinsing, spraying and filling buckets, so the picks favor the features that serve that work, flow, a sprayer, a swivel spout, a hose connection and an easy DIY installation, over a modern finish, and one commercial-grade pull-down sits among the dedicated laundry faucets for a sink that is also on show.
Metal and Finishing
Brass and stainless steel are the most common metals among the picks. The Delta 2131LF is solid brass construction and the American Standard Colony PRO has a brass swivel spout, the Kraus KPF-1610SS has a heavy-duty metal body in a stainless steel finish, also described as brass, and the WEWE pull-down is SUS 304, while the Kohler Simplice has premium metal construction with finishes that resist corrosion and tarnishing and the Moen 4736 a chrome plated surface. Lead content is the other half of the material question, and disclosure varies. The Colony PRO carries 0.25 percent or less total lead by weighted average and NSF 372, the Kohler Simplice and Jolt are listed to NSF/ANSI/CAN 61 and 372, the Kraus is certified by IAPMO to NSF/ANSI 61 and 372, and the Moen 4736 is listed to ASME A112.18.1/CSA B125.1 alone.
Sprayer Function
The Kohler Simplice and the Kraus KPF-1610SS each have two spray functions, and the WEWE has three. Kohler's Simplice switches by touch control between an aerated stream and Sweep spray, the Kraus KPF-1610SS is a 2-function pull-down, and the WEWE adds pause to stream and spray, a pause meant to avoid splashing in multitask mode. All four two-handle laundry faucets among the picks come without a sprayer. The Moen Chateau 74998 gives an aerated stream, and the Delta 2131LF has no connection for a side sprayer.
Extendable Sprayer Wand
An extendable sprayer wand takes the spray out of the spout on its hose, and each maker states that reach its own way, a 68-inch hose on the Moen Arbor 4736, a 20-inch pull-down reach on the WEWE and approximately 16 inches of hose reach after installation on the Kraus KPF-1610SS. The Kohler Simplice's pull-out spout extends reach well beyond the sink, with no figure published, the Kraus KPF-1610SS returns its sprayhead with a counterweight, and the WEWE uses a gravity ball system for secure sprayer retraction after use.
Swivel Spouts
Swivel spouts set how much of the sink a faucet covers, and the arc varies widely. The Delta 2131LF spout and the American Standard Colony PRO brass spout both turn 360 degrees, as does the WEWE, while the Kraus KPF-1610SS swivels 180 degrees and the Kohler Simplice's spout rotates 120 degrees.
Utility Sink Faucet with Sprayer and Hose Connection
Among the picks, the Moen Arbor 4736 is the one utility sink faucet with sprayer and hose connection together, a pull-down with a threaded garden hose outlet, while the Kohler Jolt K-30619, the Delta 2131LF and the American Standard Colony PRO take a hose on a fixed spout. The Jolt's outlet is 3/4-inch, 19 mm, GHT for a garden hose or other accessory, and the Delta 2131's is 3/4-11.5 NH, also a 3/4-inch hose size, while Moen and American Standard state no size for their garden hose outlet and hose end.
Section P2902.4.3 of the International Residential Code reads the same in the 2018, 2021 and 2024 editions, as Texas, Pennsylvania and Maryland adopted them, and requires sillcocks, hose bibbs, wall hydrants and other openings with a hose connection to be protected by an atmospheric-type or pressure-type vacuum breaker, a pressure vacuum-breaker assembly or a permanently attached hose connection vacuum breaker. The same section exempts water heater and boiler drain valves meant only for tank draining, and supply valves for clothes washing machines where backflow prevention is otherwise provided or integral with the machine. Delta's commercial 28C2384 wall-mount service sink faucet has a body-mounted vacuum breaker beside its garden hose end outlet, and the code edition a jurisdiction adopts decides which text governs.
Read plainly, the section's other openings with a hose connection take in a laundry faucet's hose-thread spout as well, so a garden hose left attached at the laundry tub falls under the same backflow rule as a hose bibb on an outside wall. That is a reading of the code text, not a ruling on it, and the local plumbing inspector settles how it applies to a given sink.
Single Hole or 4-Inch Utility Sink Faucet?
A single-hole utility sink faucet fits a sink drilled with one hole and a 4-inch faucet fits a sink drilled on 4-inch centers, and hole sizes and counts vary by model. Moen's Arbor 4736 goes through one hole of 1-1/4 to 1-1/2 inches, 32 to 38 mm, the Kraus KPF-1610SS installs in a single hole, or in three with its DP02 deck plate sold separately, and the WEWE fits 1 or 3 holes with an included deck plate.
Kohler's Jolt takes three holes on 4-inch, 102 mm, centers, and on the same spacing Moen's Chateau 74998 takes two 1-inch minimum holes, Delta's 2131LF 2 or 3 holes and American Standard's Colony PRO two holes of 35 to 38 mm, while Kohler's Simplice fits three holes on 4-inch centers and includes the parts for a single hole. Deck limits differ as well, 1-1/2 inches, 38 mm, for the Moen 4736, 1 inch, 25 mm, for the Delta 2131LF and 3/4 inch, 19 mm, for the Moen 74998.
Heavy-Duty Utility Sink Faucet Flow Rate
For a heavy-duty utility sink faucet, the Moen Arbor 4736 is rated at 4.0 gpm, 15 L/min, maximum, the Kohler Simplice at 4.0 gpm maximum and the Jolt at 4.0 gpm minimum, both at 20 psi, while the Kraus and WEWE kitchen pull-downs run at 1.8 gpm. The federal limit of 2.2 gpm, 8.3 L/min, at 60 psi in 10 CFR 430.32 is written for lavatory and kitchen faucets, and the federal definition of a faucet covers lavatory, kitchen and metering faucets and their replacement aerators.
Published figures for the Delta 2131LF range from 7.5 GPM at 60 PSI from Delta to 2.2 GPM from a plumbing distributor and 1.8 gpm in retail descriptions, while the commercial Delta 28C2384 is rated at 4 gpm at 60 psi, the Colony PRO at a 1.5 gpm maximum and the Moen Chateau 74998 as Unrestricted, against 2 gpm in retail descriptions. The test pressures differ, 20 psi against 60 psi, so the figures read as ratings and support no like-for-like ranking.
Conclusion
- The Moen Arbor 4736 puts a pull-down sprayer and a threaded garden hose outlet on one faucet for the laundry room.
- The Kohler Simplice K-22035 brings a two-function pull-out sprayhead to a sink drilled with three holes on 4-inch centers.
- The Kohler Jolt K-30619 gives the sink a garden hose connection on its 3/4-inch GHT swing spout.
Related Articles
- 10 Best Kitchen Sink Faucets & Pull‑Down Sprayers for Modern Kitchens
- 7 Best Commercial Kitchen Faucets Right Now
- 16 Best Bathroom Faucets for Modern Bathrooms
- 12 Best Bathtub Faucets Right Now
- 10 Best Double Bowl Kitchen Sinks
- 6 Best Bar Sinks for Modern Kitchens, Home Bars & Small Spaces
- 7 Best Vessel Sinks for Modern Bathroom Design
- 10 Best Undermount Bathroom Sinks for Style and Durability
- How to Repaint a Fireclay Farmhouse Kitchen Sink
What are the different types of utility sink faucets?
The different types of utility sink faucets are single-handle pull-down and pull-out sprayer faucets and two-handle faucets with a fixed or swing spout, often threaded for a hose. Moen's Arbor 4736 is a single-handle pull-down and Kohler's Simplice K-22035 a single-handle pull-out, while the Kohler Jolt K-30619, the Delta 2131LF and the Moen Chateau 74998 are two-handle, or dual-handle, faucets with separate hot and cold controls. On the Kohler Simplice and the WEWE, a single handle controls both flow and water temperature. High-arc commercial-style pull-downs such as the Kraus KPF-1610SS are kitchen faucets sized for a laundry room too.
How do I install a utility sink faucet?
Installing a utility sink faucet follows its maker's installation instructions, once the faucet is matched to the sink's holes and deck. Kohler directs installation by its instructions for the Simplice, the Moen 4736 needs one hole of 1-1/4 to 1-1/2 inches in a deck up to 1-1/2 inches thick, and the Moen 74998 needs two 1-inch minimum holes on 4-inch centers. Supply connections differ by model, 3/8-inch compression on the Moen 4736 and the Kohler Simplice and 1/2-inch IPS on the Delta 2131LF and the Moen 74998, and the Kraus KPF-1610SS ships with pre-attached water lines and mounting hardware.
What is the best material for a utility sink faucet?
The best material for a utility sink faucet is, on balance, brass with a lead content the maker documents, as on Delta's solid brass 2131LF and American Standard's Colony PRO, whose brass spout comes with 0.25 percent or less total lead by weighted average. The Kraus KPF-1610SS pairs a heavy-duty metal body, also described as brass, with a stainless steel finish and NSF/ANSI 61 and 372 certification, and chrome appears as a plated surface, as on the Moen 4736.
How long do utility sink faucets last?
Utility sink faucets carry warranties from five years to a lifetime, and the warranty is the clearest published measure of durability. The Kohler Jolt carries the KOHLER Faucet Lifetime Limited Warranty, and the Simplice's ceramic disc valves exceed industry longevity standards. The American Standard Colony PRO has a limited lifetime warranty and the Delta 2131LF a lifetime faucet and finish limited warranty to the original consumer purchaser. Moen covers the Chateau 74998 with a limited lifetime warranty to the original homeowner and the Arbor 4736 with a 5-year warranty, though retail descriptions give the 4736 Moen's Limited Lifetime Warranty.
What kind of faucet for a laundry sink?
The kind of faucet for a laundry sink is a dedicated laundry faucet with a sprayer, a hose thread or both, sized to the sink's holes. Moen's Arbor 4736 pairs a pull-down with a garden hose outlet at 4.0 gpm, Kohler's Simplice K-22035 is a pull-out at 4.0 gpm at 20 psi for 4-inch centers, and Kohler's Jolt K-30619 has a 3/4-inch GHT spout. A kitchen pull-down such as the Kraus KPF-1610SS or the WEWE runs at 1.8 gpm.
What are the benefits of a pull-down sprayer on a laundry faucet?
The benefits of a pull-down sprayer on a laundry faucet are reach and spray control, since the sprayhead leaves the spout on its hose. On the Moen 4736 the pulldown and threaded garden hose outlet increase flexibility and extend reach within the sink, on a 68-inch hose, and the Kohler Simplice's pull-out spout extends reach well beyond the sink, with a touch-control switch from aerate to Sweep spray.
Article by Aida Vasquez for Architecture Lab · Published 14 September 2021 · Updated 20 October 2026
More Product Reviews

Topdon TC002C Review for Building Diagnostics: Specs, Field Tests, Alternatives

HIKMICRO B10S Review for Building Diagnostics: Specs, Field Tests, Alternatives

5 Best Fiber Laser Engravers and Cutters for Precision Work










