Brick Dimensions – Standard, Nominal & Actual Sizes

Standard brick dimensions are given as width, height and length for a brick laid as a stretcher, both for the modular, the most common US brick, and for a UK brick. The modular measures 3 5/8 by 2 1/4 by 7 5/8 inches, 92 by 57 by 194 mm, and a UK brick 102.5 by 65 by 215 mm; UK makers write the length first, 215 by 102.5 by 65 mm. Names and sizes vary by region and by maker, so the Brick Industry Association, or BIA, strongly recommends ordering brick by its specified dimensions. The mortar joint turns a size into a building module: with its joints, the US brick occupies a nominal 4 by 2 2/3 by 8 inches, three courses rise 8 inches, and a square foot takes 6.75 bricks.

Modular Brick Material Data
US modular brick, nominal 4 x 2 2/3 x 8 in
The most common brick in the United States, sized to a 3/8 in mortar joint
3 5/8 x 2 1/4 x 7 5/8 in
Specified size, W x H x L
4 x 2 2/3 x 8 in
Nominal size
3/8 in
Mortar joint, width and length
Specified size, metric
92 x 57 x 194 mm
Nominal size, metric
102 x 68 x 203 mm
Mortar joint, metric
9.5 mm
Specified size at a 1/2 in joint
3 1/2 x 2 1/4 x 7 1/2 in, 89 x 57 x 191 mm
Vertical coursing
3 courses to 8 in, 203 mm
Brick per 100 sq ft, BIA
675, or 727 per 10 m², before waste
Facing brick standard
ASTM C216-26a

What Are The Different Types of Bricks?

Brick dimensions

Brick types are classified by their materials and by how they are made. US standards cover clay or shale facing brick under ASTM C216-26a and brick made principally from sand and lime under ASTM C73-23, and concrete brick is made to the same 3 5/8 by 2 1/4 by 7 5/8 inch modular size as clay brick. By how the units harden, they fall into three groups.

  • Unfired bricks
  • Fired bricks
  • Chemically set bricks

01. Unfired Bricks

Unfired bricks are mud bricks of unbaked clay. One thumb-pressed example in buff clay, part of a large brick excavated at Tell al-Sultan, Jericho, dates from the Pre-Pottery Neolithic period, c. 8500 to 5500 BCE, and is now in Queen’s University’s Museum of Near Eastern Archaeology.

Unfired bricks

02. Fired Bricks

Fired bricks are formed and then burned in a kiln, and the clay shrinks on the way, usually 2 to 4 percent as it dries and another 2.5 to 4 percent as it fires. Raw materials and kiln temperatures vary, so absolute uniformity is impossible: brick specifications allow for size variation, and a brick’s actual dimensions differ slightly from its specified ones. Modern clay brick is shaped by one of three principal processes.

  • Dry-pressed
  • Extruded, or stiff mud, the process behind about 90 percent of brick made in the United States as of 2006
  • Soft mud, or molded
Fired bricks

03. Chemically Set Bricks

Chemically set bricks are never fired. Sand-lime, or calcium silicate, bricks are pressed from lime, sand and water and hardened in autoclaves under steam pressure at 160 to 200 °C, with pigments such as iron or chromium oxides or ochres giving them red, green and yellow finishes. The US specifies them under ASTM C73-23, and in Germany they held 24 percent of masonry construction and about 38 percent of multi-family housing construction in 2021, by the calcium silicate industry’s own count. Clay brick, for its part, owes its standing as a building material to four properties.

  • Brick masonry is inert and naturally water resistant, so it does not degrade when exposed to moisture, and clay brick has a typical lifespan of more than 150 years, although how a wall performs depends on the system around the brick.
  • Brick can be reclaimed and reused without reprocessing once the old mortar is cleaned off, and crushed scrap and demolition brick becomes new brick, landscaping chips, pavement subbase or concrete aggregate.
  • Kiln-fired clay brick is traditionally noncombustible, so it needs no ASTM E84 or E136 testing, and in the EU, Decision 96/603/EC places clay and calcium silicate units in reaction-to-fire Class A without testing.
  • Brick is absorptive and vapor permeable but does not let bulk water through, and its thermal mass reduces peak heating and cooling loads and moderates indoor temperature swings, most of all when exposed inside or built into a cavity wall.
Interlocking wall bricks 500x500 1

What Are Brick Grades?

A brick’s grade says how well it resists damage from freezing while wet, and US standards set three grades by exposure, from Negligible through Moderate to Severe Weathering. Most brick specifications set the physical requirements through three properties: compressive strength, water absorption and saturation coefficient.

  • Negligible Weathering, NW, the least severe exposure class, applied in the 2007 classification of US brick grades only to ASTM C62 building brick, a standard now in its C62-23 edition.
  • Moderate Weathering, MW, as ASTM C73-23 defines it for sand-lime brick, is for brick exposed to freezing temperatures but unlikely to be saturated with water: typically the face of a wall away from parapets and foundations, or US regions with less severe frost action or a drier climate than the northeastern quarter. Facing brick to ASTM C216-26a and hollow brick to ASTM C652-22 are made in this grade or in SW.
  • Severe Weathering, SW, under the same standard, is for brick exposed to freezing temperatures while wet, typically in foundation courses and parapets in the northeastern quarter of the United States, and it is the grade for facing and hollow brick that will meet those conditions.

Standard Brick Dimensions

A standard US modular brick is 3 5/8 inches wide, 2 1/4 inches high and 7 5/8 inches long, the width sometimes being called the brick’s thickness. Laid with a 3/8 inch, 9.5 mm, mortar joint it occupies a nominal 4 by 2 2/3 by 8 inches. Height works differently: three courses are set to rise 8 inches, 203 mm, so the bed joints vary with the coursing, while the 3/8 inch joint governs only the width and length. With a 1/2 inch joint, the same nominal size comes from a brick made 3 1/2 by 2 1/4 by 7 1/2 inches, 89 by 57 by 191 mm.

A standard UK brick is 102.5 mm wide, 65 mm high and 215 mm long, about 4 by 2 1/2 by 8 1/2 inches in a straight conversion at 25.4 mm. That is the work size UK makers declare under BS EN 771-1:2011+A1:2015, a standard that does not itself fix brick sizes. With its nominal 10 mm joint, about 0.39 inch, each brick takes up a co-ordinating size of 112.5 by 75 by 225 mm.

Different Brick Dimensions

A modular brick has three sets of dimensions, nominal, specified and actual; a non-modular brick has only the specified and actual ones. Each set does a different job: the specified size goes on the order, the actual size is the brick as manufactured, within a tolerance of it, and the nominal size, joints included, is the module a modular wall is planned on.

01. Actual dimensions

Actual dimensions are what a brick measures as manufactured, generally within a tolerance of its specified dimensions. That tolerance depends on the brick’s type and size and is set in the applicable ASTM specification, such as ASTM C216-26a for facing brick and ASTM C652-22 for hollow brick. Under C216 as summarized in 2007, the permitted variation grows with the dimension and is tighter for Type FBX than for Type FBS brick. That summary follows the 2008 ASTM edition, and the edition a building code or project specification references is the one that governs.

02. Nominal dimensions

Nominal dimensions apply to modular brick: the specified dimension plus the intended mortar joint, which gives whole-number modules of 4 or 8 inches, or 100 mm in SI units. The most common grid is 4 inches, 102 mm, shared with concrete masonry units, so three courses of modular brick, joints included, equal one 8 inch block course, the module behind standard cinder block dimensions. On that grid, a masonry opening 24 brick courses plus one joint high works out to 5 feet 4 inches, 1.63 m.

03. Specified dimensions

Specified dimensions are the size the brick is expected to be made to, without mortar, and they belong in project specifications and purchase orders; besides its actual size, they are the only set a non-modular brick has. For drawings, the BIA recommends nominal dimensions at scales smaller than 1/4 inch per foot, with a note telling the mason the intended actual size, and specified dimensions at 1/4 inch per foot and larger and on shop drawings.

What Is the Difference Between Non-Modular and Modular Brick Dimensions?

A modular brick is sized so that its specified dimension plus the intended joint lands on a modular dimension, while a non-modular brick has specified and actual dimensions but no nominal ones. The module makes design and construction easier, which is why the vast majority of contemporary brickwork uses modular brick and modular dimensioning.

The standard US mortar joint is 3/8 inch, and every standard size also has specified dimensions for a 1/2 inch joint. Without a nominal size, a non-modular brick is ordered and detailed by its specified dimensions, and its proportions shape the bond. One whose length is about three times its width usually goes in one-third running bond, while in half running bond the brick near wall ends and openings usually has to be cut to keep the pattern.

Some sizes answer particular needs, larger brick to make bricklaying more economical and thinner brick to conserve resources, and size moves the count sharply: 100 square feet of wall takes 675 Modular brick but only 225 Meridians, a third as many units for the same wall, before waste.

What Are The Modular Brick Types?

The named modular types are the Modular, the Norman and the Roman, the taller Engineer sizes, and the Closure, Utility and Meridian, each sized for a 3/8 and a 1/2 inch joint and stated as width by height by length, the recommended order for a brick laid as a stretcher. The family also includes a Double Meridian, through-wall units and several sizes with no agreed name. The Engineer sizes stand taller on the same lengths as the Modular and Norman: a nominal height of 3 1/5 inches means five courses rise 16 inches.

For a 3/8-inch mortar joint, the dimensions are as follows:

BrickNominal W x H x L, inNominal, mmSpecified at a 3/8 in joint, inAt a 3/8 in joint, mmSpecified at a 1/2 in joint, inAt a 1/2 in joint, mmCoursingBrick per 100 sq ftBrick per 10 m²
Modular4 x 2 2/3 x 8102 x 68 x 2033 5/8 x 2 1/4 x 7 5/892 x 57 x 1943 1/2 x 2 1/4 x 7 1/289 x 57 x 1913 courses to 8 in, 203 mm675727
Engineer Modular4 x 3 1/5 x 8102 x 81 x 2033 5/8 x 2 13/16 x 7 5/892 x 71 x 1943 1/2 x 2 3/4 x 7 1/289 x 70 x 1915 courses to 16 in, 406 mm563605
Closure Modular4 x 4 x 8102 x 102 x 2033 5/8 x 3 5/8 x 7 5/892 x 92 x 1943 1/2 x 3 1/2 x 7 1/289 x 89 x 1911 course to 4 in, 102 mm450484
Roman4 x 2 x 12102 x 51 x 3053 5/8 x 1 5/8 x 11 5/892 x 41 x 2953 1/2 x 1 1/2 x 11 1/289 x 38 x 2922 courses to 4 in, 102 mm600646
Norman4 x 2 2/3 x 12102 x 68 x 3053 5/8 x 2 1/4 x 11 5/892 x 57 x 2953 1/2 x 2 1/4 x 11 1/289 x 57 x 2923 courses to 8 in, 203 mm450484
Engineer Norman4 x 3 1/5 x 12102 x 81 x 3053 5/8 x 2 13/16 x 11 5/892 x 71 x 2953 1/2 x 2 3/4 x 11 1/289 x 70 x 2925 courses to 16 in, 406 mm375404
Utility4 x 4 x 12102 x 102 x 3053 5/8 x 3 5/8 x 11 5/892 x 92 x 2953 1/2 x 3 1/2 x 11 1/289 x 89 x 2921 course to 4 in, 102 mm300323
Meridian4 x 4 x 16102 x 102 x 4063 5/8 x 3 5/8 x 15 5/892 x 92 x 3973 1/2 x 3 1/2 x 15 1/289 x 89 x 3941 course to 4 in, 102 mm225242

For a 1/2-inch mortar joint, the dimensions are as follows:

The thicker 1/2 inch joint comes out of the brick, on the same nominal sizes and coursing: every width drops to 3 1/2 inches, 89 mm, and every length to 7 1/2, 11 1/2 or 15 1/2 inches, 191, 292 or 394 mm. Most heights drop as well, to 2 3/4 inches on the Engineer sizes, 3 1/2 on the Closure, Utility and Meridian and 1 1/2 on the Roman, but the Modular and Norman stay 2 1/4 inches high. Within the range of the two joints, specified dimensions may vary from maker to maker, and the BIA’s 2009 brick counts are for running or stack bond, before waste.

What Are the Non-Modular Brick Types?

The non-modular brick types include the Queen, the King and the Standard, along with an Engineer Standard and a Closure Standard. Each is sized for both joints but has no nominal dimension, and the brick counts, as for the modular sizes, are for running or stack bond, before waste.

BrickSpecified at a 3/8 in joint, inAt a 3/8 in joint, mmSpecified at a 1/2 in joint, inAt a 1/2 in joint, mmCoursingBrick per 100 sq ftBrick per 10 m²
Queen2 3/4 x 2 3/4 x 7 5/870 x 70 x 1943 x 2 3/4 x 876 x 70 x 2035 courses to 16 in, 406 mm550592
King2 3/4 x 2 5/8 x 9 5/870 x 67 x 2443 x 2 3/4 x 9 3/476 x 70 x 2485 courses to 16 in, 406 mm455490
Standard3 5/8 x 2 1/4 x 892 x 57 x 2033 1/2 x 2 1/4 x 889 x 57 x 2033 courses to 8 in, 203 mm655705

Those names are not fixed sizes. Glen-Gery’s Queen is 3 by 2 3/4 by 7 5/8 inches, where the BIA tables give 2 3/4 by 2 3/4 by 7 5/8 inches at a 3/8 inch joint, and like any brick’s name and size, a Queen’s nominal size varies from manufacturer to manufacturer. The shallow bed depth also changes how it is laid: a Queen does not turn a corner on half bond, so it goes in one-third bond, or the first brick of each corner course is cut to about three-quarter length.

Matching an older 8 inch Standard brick can be difficult, since at least one maker supplies standard size brick only as a special production order. The economical route is usually a contemporary size the maker still produces, matched on the faces exposed to view.

How Many Bricks Per Square Foot?

For estimating, the working figure is 6.75 modular bricks per square foot of wall, 675 per 100 square feet, or 72.7 per square meter, 727 per 10 m², in running or stack bond and before waste. As a general rule waste and breakage add at least 5 percent, so the bricks required for 100 square feet come to at least about 709.

Glen-Gery’s count is higher, about 6.86 modular bricks per square foot, roughly 686 per 100 square feet, and the gap comes from how each course is measured. Glen-Gery adds the 3/8 inch joint to the brick’s 2 1/4 inch height for a 2 5/8 inch course, while the BIA’s 6.75 counts each brick at its nominal 2 2/3 by 8 inch face, which lets the bed joint vary with the coursing, to about 5/12 inch, 10.6 mm, when three Modular courses make 8 inches. Larger units cut the count: in round numbers, a square foot takes about 6 Queens against 7 Modulars.

The Australian brick is a larger unit, 230 by 110 by 76 mm laid with a 10 mm joint, so the count falls to 48.5 bricks per square meter, about 4.51 per square foot, or 50 per square meter, about 4.65 per square foot, once 3 percent is added for wastage.

What Is The Standard Brick Size?

Brick sizing varies from country to country. The UK, Australian and Indian sizes are set in millimeters, but in the UK and Australia the standards set tolerances and requirements and leave the size itself to the makers, while in India IS 1077:1992 sets the sizes directly. Inch figures for these metric bricks are straight conversions at 25.4 mm, not sizes the makers publish, and which edition of each standard governs depends on local adoption.

CountryW x H x L, mmInchesMortar jointSize set by
USA, modular92 x 57 x 1943 5/8 x 2 1/4 x 7 5/8, the published size3/8 in, 9.5 mmBIA tables, ASTM C216-26a for facing brick
United Kingdom, work size102.5 x 65 x 2154.04 x 2.56 x 8.4610 mm nominal, about 0.39 inMakers, declared under BS EN 771-1:2011+A1:2015
United Kingdom, co-ordinating size112.5 x 75 x 2254.43 x 2.95 x 8.86IncludedWork size plus 10 mm joints, BDA guide
Australia110 x 76 x 2304.33 x 2.99 x 9.0610 mm, by makersMakers, units to AS/NZS 4455.1:2008
India, modular90 x 90 x 1903.54 x 3.54 x 7.481 cm allowance, IS 2212:1991IS 1077:1992
India, non-modular110 x 70 x 230, or 110 x 30 x 2304.33 x 2.76 x 9.06, or 4.33 x 1.18 x 9.06Bed joints 12 mm at most, IS 2212:1991IS 1077:1992

UK makers declare tolerance on the mean size of a sample under BS EN 771-1. In the tightest category, T2, a 215 mm length must average 211 to 219 mm, plus or minus 4 mm, with plus or minus 3 mm on the 102.5 mm width and plus or minus 2 mm on the 65 mm height.

Traditional UK bricks were made to imperial measurements, and reclaimed ones mostly run 225 to 235 mm long, 100 to 110 mm wide and 60 to 80 mm high, many of them 73, 76 or 80 mm high against the 65 mm of a modern metric brick, so metric bricks used to repair an imperial wall either push the mortar joints out of line or leave them thick.

Metric modular brick means different units in different places. India’s 190 by 90 by 90 mm modular brick sits on a 100 mm module with a 1 cm joint allowance under IS 2212:1991, so four courses and three joints measure 39 cm. In the US at least one maker offers a metric modular brick of 90 by 57 by 190 mm, a different unit from the inch modular brick, which converts to 92 by 57 by 194 mm.

What Are Brick Bonds?

Brick bonds are the laying patterns of brickwork, and they do structural and visual work at once: stretchers laid along the wall bond it lengthwise, and headers laid across it bond it through its thickness. The mix of the two sets both the strength and the look, from English bond, with every second course in headers, to stack bond, with no overlap at all.

English Bond

English bond alternates courses of headers and stretchers, so every second course ties the wall across its width. India’s code of practice, IS 2212:1991, credits it with contributing substantially to the strength of brickwork and notes that it may be particularly suitable for walls carrying heavy loads.

1. English brick bond

Stretcher Bond

Stretcher bond, also called running bond, is the simplest of the basic pattern bonds: all stretchers, laid lengthwise along the face of the wall. With no headers to bond it, it is usually held with metal ties and is used largely in cavity walls and brick veneer, and IS 2212:1991 allows only stretcher bond in hollow walls of half-brick thickness unless purpose-made snap headers are available.

Common Bond

Common bond, or American bond, is a variation of running bond: a course of full-length headers at regular intervals, usually every fifth, sixth or seventh course, interrupts the stretchers, and those headers bond the wall structurally through its thickness as well as marking the pattern.

Header Bond

Header bond lays every course as headers, across the width of the wall, so it bonds through the wall’s thickness, and a three-quarter bat in alternate courses at the quoins gives it an overlap of half a brick’s width. IS 2212:1991 uses it for walls curved on plan and, preferably, for brick foundation footings.

Stack Bond

Stack bond is purely a pattern bond: every vertical joint lines up, so no unit overlaps its neighbors and the bond itself ties nothing together. For that reason steel reinforcement is advisable in large wall areas and in load-bearing construction.

Brick dimensions

Conclusion

Brick dimensions follow the module a country builds on: a 4 inch grid in the US, a 215 mm brick with a 10 mm joint in the UK, a 100 mm module in India. Because names vary from maker to maker, the specified dimensions are the ones to order by, and the bond is chosen for structure as much as for appearance, from English bond, which ties a wall through its thickness, to stack bond, which is purely a pattern.

Related Articles 

2 thoughts on “Brick Dimensions – Standard, Nominal & Actual Sizes”

  1. Learned a lot from your article, and appreciate it’s written in plain language.
    BUT … Am I misunderstanding something? All your brick measurements are given as “mm” …. “For A Thickness of 3/8 inches, The Dimensions Are:
    Modular: 3 5/8 mm x 2 1/4 mm x 7 5/8 mm by 4 x 2 2/3 mm x 8 mm”
    Did you mean to give these as “in” — inches?

  2. Hello John, sincere apologies for the confusion, we did re-check the entire article and we had some errors indeed! Thank you for pointing it out, the entire article has been re-check and adjusted, it should not have the correct measurements, thank you for the comment and helping us make this a better resource.

Leave a Comment