The 11×17 paper size is ANSI B, the North American sheet of 11 by 17 inches, which is exactly 27.94 by 43.18 centimeters or 279.4 by 431.8 millimeters. Paper makers and print drivers call the same sheet Tabloid or Ledger, and engineering offices issue half-size plan sets on it, a 22 by 34 inch drawing printed at exactly half scale. The working questions about 11×17 are its metric and pixel dimensions, the names standards and software give it, how it compares with letter, legal, A4, A3 and the ARCH sheets, and how a drawing set prints on it to scale.
What Paper Size Is 11×17?
11×17 is the B paper size of the North American engineering sheet series, the step between letter, the A size, and the 17 by 22 inch C size. The Printer Working Group’s media-name standard, PWG 5101.1-2013, files it as na_ledger_11x17in and states that the engineering sizes are defined in ASME’s decimal-inch and metric drawing-sheet standards. AutoCAD’s PDF plotter names its entries ANSI B, with a full-bleed variant, and an Onshape forum reply points metric users to an ANSI_B_MM drawing template.
Paper makers, printers and Windows list the same sheet as Tabloid or Ledger. Cut across its long side, an 11×17 sheet gives two 8.5 by 11 inch letter pages, and folded once it makes a letter-size folder of four pages. The Government of Canada specifies its federal letterhead in the inch-based letter and legal sizes. The international A series of ISO 216 has no 11 by 17 inch sheet, and its nearest size, A3, is wider and shorter.
Dimensions Of 11×17 Paper
11×17 paper measures 11 by 17 inches in portrait and 17 by 11 inches in landscape, as big as two letter sheets side by side. The inch is exactly 2.54 centimeters, a factor NIST prints as exact, so the metric dimensions of 11×17 are exact conversions of the inch size. The Printer Working Group’s standard keeps the sheet defined in inches and tells software to leave it unconverted for exchange between programs, and the 279 by 432 mm sometimes printed for 11×17 is a rounding of the exact figure.
Dimensions In Metric Units
11×17 in cm is 27.94 by 43.18 cm, and 11×17 in mm is 279.4 by 431.8 mm, both exact.
| Orientation | Inches | Millimeters | Centimeters | Points |
|---|---|---|---|---|
| Portrait | 11 x 17 | 279.4 x 431.8 | 27.94 x 43.18 | 792 x 1224 |
| Landscape | 17 x 11 | 431.8 x 279.4 | 43.18 x 27.94 | 1224 x 792 |
Windows lists Tabloid as 11 by 17 inches and Ledger as 17 by 11. A point is 1/72 inch.
Canada’s 1976 metric correspondence standard, CAN2-9.60-M76, set a P series whose P3 sheet, 280 by 430 mm in published summaries, corresponds to ANSI B, and its successor, CAN/CGSB-9.60-94, is listed as withdrawn by the Standards Council of Canada. In Québec French, the Office québécois de la langue française defines format tabloïde as a newspaper format of usually 37.4 by 28.9 cm, a different format from 11 x 17 paper. Sheet size and drawing units are separate choices, so a drawing dimensioned in millimeters prints on an 11×17 sheet from an ANSI B metric template. En centimètres, une feuille de 11 x 17 pouces mesure 27,94 x 43,18 cm, soit 279,4 x 431,8 mm.
Dimensions In Pixels
11×17 in pixels, or px, is the inch size multiplied by the resolution in pixels per inch, so a portrait sheet is 3300 by 5100 pixels at 300 ppi and 792 by 1224 pixels at 72 ppi. Photoshop’s Image Size dialog takes resolution in pixels per inch, and CSS fixes its reference pixel at 1/96 inch.
| Orientation | 72 ppi | 96 ppi | 150 ppi | 300 ppi | 600 ppi |
|---|---|---|---|---|---|
| Portrait | 792 x 1224 | 1056 x 1632 | 1650 x 2550 | 3300 x 5100 | 6600 x 10200 |
| Landscape | 1224 x 792 | 1632 x 1056 | 2550 x 1650 | 5100 x 3300 | 10200 x 6600 |
Pixels, or px, equal inches multiplied by pixels per inch.
Uses And Advantages Of 11×17 Paper Size
The uses of 11×17 paper center on drawings reduced from full-size sheets, and its advantage is that a 22 by 34 inch ANSI D drawing printed at 50 percent lands on it at exactly half scale. North Carolina’s Roadway Design Manual sets the standard Highway Design Branch plan sheet at 34 inches wide and 22 inches high and directs that from July 1996 all half-size drawings be reproduced on 11 x 17 paper. New York’s transportation department moved its contract plans to 22 by 34 inch sheets in 1988 so that half-size plans on 11 x 17 print at exactly one half the original scale. In permit work, the City of Alameda’s residential permit requirements, revised in April 2023, set 11 x 17 inches as the smallest plan sheet allowed. For site work, a reprographics firm notes that field crews commonly reduce full-size sets to 11×17 for portability, a sheet that fits in a binder, a truck cab or a site box.
11×17 prints on office inkjets sold as Ledger or wide-format models, some of which take sheets up to 13 by 19 inches, the size the Printer Working Group names super-b and Epson labels A3+, while the Windows paper list defines Super B as 305 by 487 mm. The datasheet of a 24-inch HP plotter lists B among its standard sheets beside A, C and D, so one roll printer feeds the 22 by 34 inch original and its half-size copy.
Types of 11×17 paper include 20 lb copy paper and cover stock, and paper in the size is sold by weight and grade. Hammermill sells its 20 lb copy paper as Ledger, 11 x 17, and its cover stock in a Digital Size written 17 x 11, beside an 18 by 12 inch sheet. The Government of Canada’s letterhead specification pairs 20 to 24 lb bond with 75 to 90 grams per square meter.
How do you print 11×17 to scale?
Printing 11×17 to scale means printing a 22 by 34 inch original at exactly 50 percent, printing a larger sheet laid out with wide margins at 50 percent, or plotting an 11×17 layout at 1:1 with each viewport set to the drawing scale. In Acrobat, Fit reduces or enlarges each page to the printable area and changes the scale, Actual size prints unscaled and crops what does not fit, and Custom Scale prints at a stated percentage. In AutoCAD the paper size is chosen in the Page Setup Manager under Modify, the layout’s default plot scale is 1:1, and Fit to Paper scales the plot to the sheet.
When 11×17 is missing from a paper list, the list is following the selected printer. AutoCAD shows only the standard sizes the selected plotting device supports, and the full list when no plotter is selected. An answer to a Word for Mac user on Microsoft Q&A in 2026 said that choosing Any Printer under Format For should bring Tabloid at 11×17 into the paper list. For PDFs, an accepted answer on the Autodesk Community recommends AutoCAD’s full-bleed B entry, because the normal B size carries large margins.
How Is 11×17 Paper Different From Other Paper Sizes?
In a size comparison, 11×17 paper is different from other paper sizes in its place in the series and its proportions, being twice letter, half of ANSI C and a quarter of ANSI D, with a long-to-short ratio of about 1.545.
| Size | Inches | Millimeters | Against 11 x 17 |
|---|---|---|---|
| Letter, ANSI A | 8.5 x 11 | 215.9 x 279.4 | Exactly half |
| Legal | 8.5 x 14 | 215.9 x 355.6 | Narrower and shorter |
| A4 | 8.27 x 11.69 | 210 x 297 | Narrower and shorter |
| A3 | 11.69 x 16.54 | 297 x 420 | Wider and shorter |
| Super B, A3+ | 13 x 19 | 330.2 x 482.6 | Larger both ways |
A4 and A3 are defined in millimeters, and their inch figures are rounded. Super B is 13 by 19 inches in the Printer Working Group's list and 305 by 487 mm in the Windows paper list.
ANSI A
ANSI A is letter size, 8.5 by 11 inches, and two letter sheets make one 11×17 sheet. Letter’s ratio of about 1.294 differs from the 1.545 of 11×17, so a letter page enlarged onto 11×17 leaves a margin along its length. A3 halves into A4 at the same ratio of about 1.414.
ANSI D
ANSI D is the 22 by 34 inch sheet, and cut in half across both sides it gives four 11×17 sheets with the same 1.545 ratio. Printed at 50 percent, a D drawing is exactly 11×17, which pairs D-size originals with 11×17 half-size sets, and ANSI C, 17 by 22 inches, halves into two 11×17 sheets.
ARCH B
ARCH B is the 12 by 18 inch sheet of the architectural series, and it is the size a 24 by 36 inch ARCH D drawing becomes at 50 percent. A 24 by 36 sheet fitted onto 11×17 prints at about 45.8 percent, so its drawn scales no longer read true. New York’s transportation department met the same problem with 22 by 36 inch plans, whose reduction to 11 x 17 gave what it recorded as a 47 percent scale plan. On the Autodesk Community and the Chief Architect forum, practitioners handle it by plotting a layout set up at 11 x 17 or by designing the large sheet with wide margins, and a fit-to-paper print is not to scale.
ISO A3
ISO A3 is the 297 by 420 mm sheet of ISO 216:2007, and it is a different sheet from 11×17. A3 is 17.6 mm wider and 11.8 mm shorter, so neither sheet contains the other, and its area of 124,740 square millimeters is about 3.4 percent larger. Epson’s page for one wide-format office inkjet blurs the two, listing A3 and 11 x 17 as separate paper sizes while labeling its borderless limit A3 and 11 x 17 together.
Is 11×17 legal size?
No, 11×17 is not legal size. Legal size is 8.5 by 14 inches, the width of letter on a longer sheet, while 11×17 is wider and longer than both. Windows lists letter, legal, Tabloid and Ledger as separate paper kinds, and CSS defines letter, legal and ledger as separate page sizes.
Different Paper Sizes: ISO And ANSI
The ISO and ANSI paper sizes are two separate systems, the ISO A series defined in millimeters and the North American ANSI sheets defined in inches. ISO 216:2007, the second edition of the international standard for trimmed writing paper, was published in September 2007. The North American engineering sheets come from ASME Y14.1, whose 2020 edition carries decimal-inch and metric drawing sheets together. ASME is accredited by the American National Standards Institute, and the cover of the 2012 edition of Y14.1 names that edition an American National Standard.
The ANSI sheets alternate between two ratios, about 1.294 for A, C and E and about 1.545 for B and D, so a drawing moved one size up or down changes shape. The ISO A sheets from A0 to A4 keep one aspect ratio, about 1.414, close to the square root of 2, so each halves into the next size without changing shape. CSS Paged Media Level 3, the W3C module of Cascading Style Sheets that lays out web content as pages, defines letter, legal and ledger page sizes beside A3, A4 and A5, with ledger at 11 inches wide by 17 high.
| Sheet | ANSI inches | ANSI millimeters | ARCH inches | ARCH millimeters | Closest ISO size |
|---|---|---|---|---|---|
| A | 8.5 x 11 | 215.9 x 279.4 | 9 x 12 | 228.6 x 304.8 | A4 |
| B | 11 x 17 | 279.4 x 431.8 | 12 x 18 | 304.8 x 457.2 | A3 |
| C | 17 x 22 | 431.8 x 558.8 | 18 x 24 | 457.2 x 609.6 | A2 |
| D | 22 x 34 | 558.8 x 863.6 | 24 x 36 | 609.6 x 914.4 | A1 |
| E | 34 x 44 | 863.6 x 1117.6 | 36 x 48 | 914.4 x 1219.2 | A0 |
The millimeter figures are exact conversions of the inch sizes.
What is an 11×17 paper called?
11×17 paper is called ANSI B, or B size, in the engineering drawing series, and Tabloid or Ledger in printing and paper. The Printer Working Group’s media-name standard lists tabloid as the legacy name and ledger, b and engineering-b as aliases of one 11 by 17 inch size, and treats orientation as separate from size. Windows defines Tabloid as 11 by 17 inches and Ledger as 17 by 11, with a third entry for 11 x 17 itself. The CSS ledger page size is 11 inches wide by 17 high. In a 2001 thread on the Printer Working Group’s mailing list, a Xerox participant read ledger as landscape and tabloid as portrait, after the way a ledger and a newspaper tabloid are each viewed.
Is 11×17 paper the same as A3 paper?
No, 11×17 paper is not the same as A3 paper. A3 belongs to the metric ISO series and 11×17 to the inch-based North American series, and A3 is the wider, shorter and slightly larger sheet, so artwork made for one sheet crops or leaves margins on the other.
What’s the size of Tabloid paper?
The size of Tabloid paper is 11 by 17 inches, with an area of 187 square inches. Tabloid Extra has two definitions, 12 by 18 inches as the Printer Working Group’s alias for ARCH B, and 11.69 by 18 inches in the Windows paper list for PostScript drivers.
Do architects use 11×17 paper?
Yes, architects use 11×17 paper for permit sets, and the City of Alameda’s residential permit requirements list architectural plans among the drawings on sheets no smaller than 11 x 17 inches. Half-size drawing sets and copies sent out to scale on 11×17 are the other uses practitioners describe on the Autodesk Community and the Chief Architect forum. A 24 by 36 inch ARCH D sheet halves to 12 by 18 inches, so a true half-size set on 11×17 comes from a 22 by 34 inch ANSI D original, the pairing New York’s transportation department adopted in 1988 and North Carolina’s Roadway Design Manual sets out, or from a larger sheet laid out with wide margins.

