A foyer is the entrance hall of a residence — the passage or room just inside the front door, sometimes with a vestibule between it and the outdoors — and the model IRC gives it no minimum floor area in square feet or square meters, though the landing, hallway and ceiling rules still impose dimensions on the entry. The Getty Art & Architecture Thesaurus defines the space in those terms and lists foyer, entryway and entrance hall as names for the one concept, and other instruments reach the room by other routes, New York City’s Housing Maintenance Code counting a foyer in a multiple dwelling as a living room once its floor area passes a tenth of the dwelling unit’s total, a fifth where every living room runs at least a fifth oversized. The International Residential Code defines habitable space to exclude halls, so the 70-square-foot (6.5 square meters) minimum room area never reaches a foyer, and what the code regulates at an entry is specific. A 32-inch (813 mm) clear egress door, a landing at least 36 inches (914 mm) deep on each side of each exterior door, a 3-foot (914 mm) hallway width and a 7-foot (2,134 mm) ceiling where the entry is classified as a hallway or required circulation, and at least one hallway lighting outlet under the National Electrical Code, wall-controlled or on the remote, central or automatic control the section’s own exception permits there, with at least one exterior lighting outlet at grade-level entrances, are the five rules that bind, every citation edition-stamped because the 2024 IRC renumbered them. In meters the regulated dimensions come from England’s Approved Document M, which applies there to newly erected dwellings and to dwellings undergoing material alteration, with a 775 mm entrance door, a 900 to 1200 mm corridor serving the entrance storey’s rooms depending on approach, and a 1500 mm turning circle for a wheelchair-usable entry. Renovation cost carries two institutional figures for the entry door, Zonda’s 2025 Cost vs. Value Report putting steel entry door replacement at a $2,435 national average job cost with 216.4 percent of it recouped at resale, and the NAR and NARI 2025 Remodeling Impact Report putting a new steel front door at 100 percent cost recovery as estimated by NARI’s remodeler members; the durable anatomy of an entry budget runs from the door assembly through the landing, flooring, lighting and closet joinery. Foyers vary in size, functionality, uses, and furniture choices, influencing renovation decisions. The furnishings run from console tables, hall trees and benches or settees to mirrors, artwork and storage furniture, and the palette spans white, gray, blue, beige, green, yellow and red. Energy efficiency comes from efficient lighting, natural light, proper insulation and an energy-efficient door.
What is a foyer?
A foyer, in a house, is the room or passage just inside the entrance, the space the Getty Art & Architecture Thesaurus catalogues as entrance halls, with foyers (domestic), entryways and entries (domestic) recorded as alternate names for the same concept. The same vocabulary reserves lobbies for the equivalent space in public buildings, so the theater foyer and the house foyer are two different records. The American Heritage Dictionary, Fifth Edition, defines the word in two senses, a lobby or anteroom of a theater or hotel and an entrance hall or vestibule, treating entrance hall and vestibule as interchangeable. The Getty vocabulary keeps them apart. Everyday usage follows the dictionary; architectural cataloguing follows the thesaurus.
The vestibule has a test. In the Getty AAT a vestibule is a space between the outer and inner doors of a building, or a sheltered recess just outside the outer doors; a space just inside the outer door with no barrier separating it from the interior is an entrance hall. The American Heritage definition of vestibule, a small entrance hall or passage between the outer door and the interior, agrees on the position and drops the second door. A mudroom is defined by function and position instead, as a vestibule or other peripheral space of a house in which wet and muddy clothes and footwear come off before entering the house. The AAT files entrance halls, lobbies, vestibules and mud rooms as siblings under one parent category, entrance spaces.
The word explains the confusion. French foyer means hearth, from Latin focus through focarium and Old French foier, and the one French word maps in the Getty AAT to at least three separate English architectural concepts, entrance halls, lobbies and green rooms, beside the fireplace and firepit senses. English took the word in 1859 for the lobby of a theater or opera house, per the Online Etymology Dictionary; an entry that does not record the domestic sense at all. The habit of sizing an entrance to its owner reaches back to Vitruvius, who wrote in the first century BC that people of middling condition need no magnificent vestibules while nobles holding office must be given princely vestibules, lofty atria and spacious peristylia. The caution attached is that the Roman vestibulum was an outdoor forecourt between street and front door rather than the modern interior room.
What is the typical size of a foyer?
There is no typical foyer size in the model IRC, and no minimum floor area either — the answer to the size question is a definition. The International Residential Code defines habitable space as space for living, sleeping, eating or cooking, and expressly excludes halls, alongside bathrooms, closets and storage spaces. Its minimum-area rule is written for habitable rooms only, requiring a floor area of at least 70 square feet (6.5 square meters) and at least 7 feet (2,134 mm) in any horizontal dimension, at §R304 of the 2021 edition, renumbered §R312 in the 2024. A foyer is a hall, so neither limb reaches it. That absence was verified against the IRC’s own minimum-dimension provisions, namely the habitable-space definition, the minimum-room-area section, and a code professional’s published enumeration of the code’s minimum dimensions, and it is stated for the model code; a state or local amendment can always add what the model text does not.
Five rules bind an entry’s dimensions and lighting, aimed at the things in it and each stamped with its edition because the 2024 IRC reorganised Chapter 3 and renumbered the sections, a change documented by the National Association of Home Builders in its summary of the 2024 IRC’s significant changes; a bare section number is now edition-dependent. The dwelling’s one required egress door must be side-hinged with a clear width of at least 32 inches (813 mm) and a clear opening height of at least 78 inches (1,981 mm), at §R311.2 in the 2021 edition and §R318.2 in the 2024, the dimensions carrying over unchanged. Fine Homebuilding’s code columnist writes that those minimum measurements explain how 36-inch-wide by 80-inch-tall entry doors became the standard size. A landing or floor is required on each side of each exterior door, the front door included, at least as wide as the door served and at least 36 inches (914 mm) in the direction of travel, the exterior landing’s slope capped at 2 percent, at §R311.3, now §R318.3. The landing inside the door is the one enforceable depth the IRC gives a foyer floor. A hallway must be at least 3 feet (914 mm) wide under §R311.6, now §R318.6, and the section governs hallways, so the figure reaches an entry only where the space is designed or classified as a hallway or a required circulation path under the locally adopted code. Whether an open entrance hall is read that way is a determination for the authority having jurisdiction; where the entry narrows into a corridor, that reading is the plainer one. Ceiling height is 7 feet (2,134 mm) for habitable space and hallways under §R305.1 of the 2021 code, §R313 in the 2024, and that section reaches an entry on the same condition the hallway-width section does. The habitable-space definition excludes halls, so the 7 feet binds a foyer only where the space is designed or classified as a hallway or a required circulation path under the locally adopted code, again a determination for the authority having jurisdiction. Minnesota’s residential code, at Minnesota Rules part 1309.0305, applies the same 7 feet to bathrooms, toilet rooms and laundry rooms as well, where the base code permits 6 feet 8 inches, which shows that an adopting jurisdiction can change which spaces the 7 feet reaches. The National Electrical Code adds the fifth rule, at least one lighting outlet in hallways and at least one exterior lighting outlet on the exterior side of grade-level entrances, each controlled by a listed wall-mounted control device or, at those locations, by the remote, central or automatic control the section’s exception permits, per 210.70(A)(2) in the 2020 wording, with local adoption deciding which edition governs.
The ranges that circulate online are a different kind of number. The 40-to-80-square-foot foyer for a 2,000-to-3,000-square-foot home, the 3-to-4-foot width, the 5-to-10-foot depth — EngineerFix’s foyer-width guide, the page those figures were read from, cites no code, standard or dataset, and the one figure on it tied to an actual rule, 36 inches of circulation width, matches the IRC hallway section that page leaves unnamed. Houzz’s entryway dimensions guide proposes about 2 to 4 percent of the home’s total area, a rule of thumb its author Steven Randel offers without a cited standard. Read as unsourced planning conventions, the figures are serviceable. Neither of the two pages consulted puts anything harder than convention behind them.

What is the standard foyer size in meters?
There is no standard foyer size in meters; what exists in metric is regulated entry dimensions, and the metric ladder that governs is England’s Approved Document M, Access to and use of buildings, Volume 1, in the 2015 edition with 2016 amendments. It applies in England, to newly erected dwellings and to dwellings undergoing material alteration; Wales, Scotland and Northern Ireland regulate separately. At the baseline standard, M4(1), the principal private entrance door should give, in the document’s own wording, a clear opening width of 775 mm, which is 30.5 inches and materially narrower than the American egress figure, with an accessible threshold and, where a step into the dwelling is unavoidable, a rise of at most 150 mm. A standard 826 mm door leaf up to 44 mm thick is deemed to satisfy the 775 mm clear width, the metric counterpart of the American rule that the door bought is wider than the opening delivered. Corridor width is conditional on approach geometry, in the document’s own lookup table, which paragraph 1.15 writes for the doors to habitable rooms and the WC in the entrance storey and for the corridors approaching them; the entrance door itself is fixed at 775 mm under paragraph 1.14, so every row of the doorway column is an internal-door case.
| Doorway clear opening width, internal doors of the entrance storey | Corridor clear passageway width, minimum (Approved Document M, Table 1.1) |
|---|---|
| 750 mm or wider | 900 mm, when approached head-on |
| 750 mm | 1200 mm, when the approach is not head-on |
| 775 mm | 1050 mm, when the approach is not head-on |
| 800 mm | 900 mm, when the approach is not head-on |
The ladder climbs through two optional levels, each binding only where a planning authority imposes it, which is the English analogue of local adoption. M4(2), accessible and adaptable dwellings, sets every hall or landing at a minimum clear width of 900 mm with a 300 mm nib to the leading edge of every door in the entrance storey. M4(3), wheelchair user dwellings, is the level that actually sizes a usable foyer — a level external landing of 1500 by 1500 mm, doors of 850 mm clear opening, hallways of 1050 mm rising to 1200 mm where the approach to a doorway is not head-on, and a clear turning circle of 1500 mm inside the entrance area, in front of the closed door. That turning circle is a regulated dimension in metric describing exactly the space just inside a front door. M4(2) and M4(3) both carry the one regulated depth found for a true two-door vestibule. Where there is a lobby or porch, the doors sit a minimum of 1500 mm apart with 1500 mm clear between the door swings.
The American accessibility figures need their scope stated. The 60-inch turning circle, the 32-inch clear doorway and the 30-by-48-inch clear floor space belong to the 2010 ADA Standards for Accessible Design, and the ADA covers state and local government facilities and businesses serving the public; ADA.gov’s own guide places private housing under the Fair Housing Act, the ADA reaching housing programs run by governments or public accommodations. The Fair Housing Act’s design and construction requirements reach covered multifamily dwellings built for first occupancy after March 13, 1991, meaning every unit in buildings of four or more units with an elevator and the ground-floor units in four-or-more-unit buildings without one. A detached single-family house sits outside both sets of design requirements, the ADA Standards and the Fair Housing Act’s design and construction rules, so at a private front door the ADA numbers serve as published human-factors dimensions and nothing more binding.
What is the use and purpose of foyers?
The purpose of a foyer is transition — a place to arrive, pause and remove outerwear on entering, before the house proper begins. As an entrance it does practical work. Coats, hats and gloves come off there; a closet or coat hooks hold them; a bench, small table or shelves take bags, keys and mail. It also sets the decorative tone for the rest of the home, since the flooring, lighting fixtures, wall colors and furnishings met at the door introduce the aesthetic of everything beyond. Grand foyers with sweeping staircases announce a house; cozy galley-style entries read as intimate. The room earns its floor area by protecting the rooms behind it. Dirt, weather and clutter stop at the entry when the entry is equipped to stop them.
What is the typical shape of a foyer?
A residential foyer takes the shape its walls give it, a rectangle or a square in a framed plan, and the plan follows the door. A rectangular entry runs the swing of a standard 36-inch front door plus passage past it; the code supplies the fixed points, a landing at least 36 inches deep inside the door and 3 feet of hallway width wherever the space is classified as a hallway under the adopted code, and the room extends inward until the plan hands over to a hall or an adjoining room. A square entry trades depth for lateral space and takes a console wall more easily. Large luxury foyers bring curved walls, double-height volumes and stair landings into the figure. The proportions beyond the code’s fixed points belong to the designer. The working test, offered as planning judgement, is that the door swings clear, two people can pass, and the furniture stays out of the swing.

What furniture commonly equips a foyer?
The furniture that commonly equips a foyer is:
- Console Table: The display and drop surface for keys, mail and seasonal decor, styled from rustic to modern. England’s Approved Document M supplies a published limit on how far an entry passage may be narrowed, at its baseline M4(1) level in England, written for fixed obstructions such as radiators; nothing longer than 2 m, nothing opposite or close to a doorway, and no point of the passage below 750 mm clear. A console that meets the radiator’s test leaves the room walkable.
- Hall Tree: Hooks for coats, a bench for seating, and often storage underneath, the one piece that answers coats, seat and shoes together, with a designated place for guests’ bags on arrival.
- Bench or Settee: A seat for removing shoes or waiting for others; it tucks beneath a console table or sits against a wall, and it carries color or texture into the space.
- Mirror: The last-minute check before leaving, and a light reflector that makes a small entry read larger and brighter, vintage frames included.
- Artwork: A single large piece for impact or a gallery wall of smaller ones; the entrance carries the homeowner’s taste to the door.
- Storage Furniture: Sideboards, dressers or small bookcases for shoes, umbrellas and hats, keeping the entryway tidy and organized.

What is the normal ceiling height of a foyer?
The 7-foot (2,134 mm) minimum the IRC sets at §R305.1 in the 2021 edition and §R313 in the 2024 is written for habitable space and hallways, the classifications that section names, and the code writes no foyer category. Since the habitable-space definition expressly excludes halls, the figure binds an entry only where the space is designed or classified as a hallway or a required circulation path under the locally adopted code, a determination for the authority having jurisdiction. Which edition and which amendments apply follow the adopting jurisdiction too, with Minnesota, at Minnesota Rules part 1309.0305, applying the same 7 feet to bathrooms, toilet rooms and laundry rooms where the base code permits less. Above any minimum, convention takes over, and it is a preference about proportion with no measured practice behind it. An entry carries best when the ceiling clears the door head by enough that the space reads taller than it is deep. Grand entries take that further, the soaring double-height volume open to the floor above being the effect they are built for. Lower ceilings press on an arrival.
What colors are foyers usually painted?
The colors used in foyers are:
- White: The clean, expansive default. It reflects light, enlarges a small entry, and takes any decor style from contemporary to classic as a blank canvas for accent pieces and art.
- Gray: The sophisticated neutral. Light gray brightens the space; dark gray adds depth and drama; both pair across palettes from bright accents to subdued hues.
- Blue: Sky or Robin’s egg shades keep an entry fresh and airy; navy and royal blue bring elegance and depth against crisp white trim or warm wood tones.
- Beige: Warmth and versatility. It complements varied textures and materials and rewards a well-lit entry with a cozy, inviting ambiance.
- Green: Nature at the door. Light greens read refreshing and lively; olive and forest add sophistication beside natural elements and neutral tones.
- Yellow: Sunny and cheerful in its light shades; brighter yellows energize the space, especially with white or gray accents.
- Red: The bold statement. Dark reds carry luxury and richness; brighter reds add a vibrant, playful touch.

What makes the foyer functional?
The foyer is functional when arrival has somewhere to land — storage for what comes off at the door, a seat, a surface for keys and mail, and a floor that takes the weather. A well-designed foyer stays uncluttered, airy and spacious, with wall hooks for hanging coats, a bench for removing shoes and a console table for keys and purses. In an open plan that puts the front door straight into the living room, a rug or runner specifies the entry and does the defining a wall would. The floor’s dirt-control job has a published number, and it comes from commercial facility practice. The Carpet and Rug Institute recommends 12 to 15 linear feet of walk-off matting to remove 85 to 90 percent of tracked-in dirt and moisture, as reported by the facility-cleaning trade press. The domestic reading is directional; more matting captures more, and a single 3-foot doormat captures a fraction. The last function is the transition itself, the space feeling warm and welcoming while staying workable.
How is energy efficiency achieved in a foyer?
Energy efficiency is achieved in a foyer by efficient lighting, maximized natural light, proper insulation, and an energy-efficient door. Firstly, lighting. LED bulbs use up to 90 percent less energy than incandescent bulbs by the Department of Energy’s figure, and what code actually requires is modest, at least one hallway lighting outlet and at least one exterior lighting outlet on the outside of grade-level entrances, wall-controlled or on the remote or automatic control the section permits there, per National Electrical Code 210.70(A)(2) in the 2020 edition wording, local adoption governing, with a control at each floor level and at each landing level that includes an entryway, where the interior stairway between floor levels has six or more risers. The fixture and lamp chosen for that required outlet set the consumption. Secondly, natural light. Windows, skylights or a glazed door supply daylight, and light-colored or reflective surfaces carry it deeper into the plan. Thirdly, insulation and air sealing, which the Department of Energy defines separately, weatherstripping being the material it names for sealing components that move, doors among them. Since the foyer is the first point of contact with the outside, air leakage around its door is the target, and weatherstripping with a tight threshold is the counter. Lastly, the equipment. An energy-efficient door resists drafts.

How much does it typically cost to renovate a foyer?
Zonda’s 2025 Cost vs. Value Report, the 38th annual edition, published on 18 September 2025, puts steel entry door replacement at a national average job cost of $2,435 against $5,270 of value at resale, or 216.4 percent of cost recouped, second among the 28 tracked projects behind garage door replacement. The National Association of Realtors and the National Association of the Remodeling Industry, in their 2025 Remodeling Impact Report released on 9 April 2025, put a new steel front door at 100 percent cost recovery, a figure estimated by NARI’s remodeler members. The methodology is part of each figure. Zonda’s results were determined, in the report’s own words, in part through data collected from surveys of real estate professionals along with data delivered via Zonda’s collaboration with Verisk’s remodeling estimating solution, XactRemodel, across 115 local US markets by the report’s own landing page and 119 in Zonda’s press release for the same edition; a resale value drawn from that survey is a perceived value at sale and no matched-pair transaction. The Cost vs. Value Report is republished annually, so these are the 2025 edition’s figures and will be superseded. Beyond those figures, the multi-currency bands printed across the web, ranges quoted in dollars, euros and pounds at once, are conversion arithmetic performed on an estimate. The durable answer is the anatomy of the quote.
Six lines move an entry renovation, and each is durable, the ordering running from the heaviest line in a budget to the lightest. The door assembly leads. A replacement front door serving as the dwelling’s required egress door must still deliver 32 inches of clear width, which is why the 36-by-80-inch leaf is the market’s standard size, and glazing, sidelights and hardware scale the line from minor to top-tier. The landing and threshold come with it, since the code requires a landing or floor on each side of each exterior door, at least as wide as the door and 36 inches in the direction of travel, and threshold work is the point at which water gets managed. Flooring is the third line; for a level interior floor expected to be walked on wet, and TCNA’s technical bulletin names entranceways among the places where a mat can keep a lower-rated tile dry, the criterion the tile standard attaches is a wet dynamic coefficient of friction of at least 0.42, introduced in ANSI A137.1-2012 and set out in ANSI A326.3 from its 2017 edition, whose 2021 revision classes flooring as Interior, Wet at 0.42 wet DCOF or by a manufacturer’s declaration, with the standard’s own caution that the DCOF figure shall not be the only factor in choosing a tile. Porcelain is a separate matter in A137.1, whose 2022 edition TCNA lists as current, and the standard defines it by water absorption, 0.5 percent or less measured by the ASTM C373 test method; friction is measured separately, under A326.3. Lighting is the fourth; the money sits in the fixture and any added wiring, with statement lighting the classic escalator. Closet joinery and built-in storage form the fifth line, custom millwork pricing above stock carcasses. Trim, paint and wall repair close the list, cosmetic on their own and the cheapest of the six. A simple refresh touches the last three lines; a moderate project reaches flooring; structural changes to door position or opening size pull permits and push the budget to its top tier, high-end finishes compounding from there.
What factors affect the foyer renovation?
The factors that affect the foyer renovation are:
- Wall Condition: Entry walls take substantial abuse over time, from scuff marks and dents to dings and holes, and repairing them precedes any finish work.
- Lighting: The proper lighting enhances the space’s aesthetic appeal, distracts from less appealing elements and sets the mood for the rest of the home; wiring changes bring a licensed trade into the budget.
- Space Availability: The available square footage dictates the scale of the renovation, the choice of furniture and the layout.
- Desired Aesthetic: The color scheme, materials and design elements; the entrance complements the exterior and interior, serving as the design transition for the rest of the house.
- Functionality: The household’s needs decide the program, from storage for shoes and coats to a seating area or display for artwork and personal items.
- Budget: The budget dictates the choice of materials, the extent of structural changes, and the quality of fixtures and fittings.

Is an architect required to renovate a foyer?
No, an architect is not always required to renovate a foyer, and the dividing line is structure. Painting, decor and furniture ask nothing of a license. Consulting an architect is advisable once the work involves structural changes, reconfiguring the space, or altering load-bearing walls, the cases in which the design has to be structurally sound and compliant with building codes and regulations, and in which drawings, permits and contractor coordination appear. For homeowners seeking a transformative renovation with complex design elements, an architect’s design, planning and project management skills are the value being bought.
How can an architect help you upgrade a foyer?
Ways an architect can help an owner upgrade a foyer are:
- Space Optimization: Where the foyer is small, an architect extracts the maximum from it through custom paneling, wallpaper or plaster, and built-ins scaled to the wall they occupy.
- Structural Changes: Layout alterations, removing or adding walls, or changing the height of the ceiling, carried through drawings, permits and a contractor who builds what was drawn.
- Lighting Design: A lighting plan that enhances the space, hides its weaker elements and sets the mood for the rest of the home, with daylight, fixtures and switching resolved together.
- Material Selection: Durable, attractive and suitable materials, from flooring materials to wall coverings and finishes, specified for a wet, hard-used threshold.
- Aesthetic Guidance: A color scheme, design style and decorative elements that complement the rest of the home, up to the wow factor a grand entry is asked to deliver.
- Budget Management: Cost estimates for the design options, suggestions on where to save, and value tracked against the investment.

How much does it cost to hire an architect to renovate a foyer?
The cost of hiring an architect for a foyer is set by agreement, and the structure of that agreement is documented where the dollar figures are not. AIA B101-2017, the standard owner-architect agreement, addresses compensation at its Section 11.1 and is written to work with a stipulated sum, a percentage of the construction budget, or hourly billing rates against a schedule the parties complete themselves; its basic services run five phases, from schematic design and design development through construction documents, procurement and construction. The AIA states in its own instructions to B101-2017 that it makes no recommendation as to the appropriateness of any of these methods of compensation on a particular project, and that it has no guidelines or schedules specifying the amount of compensation an architect should be paid. The basis that fits a foyer, whether a percentage of the construction budget, a stipulated sum or an hourly rate, is therefore one the parties settle themselves. The dollar ranges printed online for architect fees sit outside that agreement, and the protection is the same in every case, the basis of compensation put in writing before design starts.
Is it worth it to hire an architect to upgrade a foyer?
Yes, hiring an architect to upgrade a foyer is worth it when the work is structural, with moved walls, a changed opening or a reworked stair landing, because compliance, drawings and contractor coordination are the fee’s content. Architects bring creative solutions that optimize space, improve functionality and enhance the visual appeal of the entrance. For cosmetic updates like painting or fundamental decor changes, the code parameters, from the landing depth to the passage widths, are the same ones an architect would apply, and an architect is optional.

How long is needed to redecorate a foyer?
A foyer redecoration runs as long as its scope, its approvals and its procurement take, and the order the trades follow sets the calendar. No duration for the work appears in the three remodelling studies read on 9 September 2026 — Zonda’s 2025 Cost vs. Value Report, the NAR and NARI 2025 Remodeling Impact Report and the 2026 U.S. Houzz & Home Study all report spend or cost recovery and none of them a schedule — so five drivers stand in place of a published band. Firstly, scope decides; repainting or adding new decor sits at the light end, while more extensive work such as flooring replacement or structural modifications adds demolition and substrate work ahead of any finish. Secondly, approvals; where the work changes a door position or opening size, permitting and inspection enter the sequence. Thirdly, material availability moves the schedule, and delays in obtaining specific items prolong the project. Fourthly, the complexity of the design adds rounds of decision before anything is ordered. Lastly, workforce efficiency and the homeowner’s decision-making speed open or close the gap. Prompt decisions and a skilled workforce expedite the process, while indecision and scheduling conflicts cause delays.

What are the struggles of the homeowner to redecorate a foyer?
The struggles of the homeowner to redecorate a foyer are:
- Clutter Management: One of the homeowners’ biggest struggles; mail, coats and backpacks collect at the door, and finding stylish, functional storage that fits the space and decor is the remedy.
- Limited Space: In a small foyer, wall space for artwork or mirrors is scarce, and furniture has to fit without making the entry feel cramped or cluttered.
- Wall Condition: Scuff marks, dents, dings and holes accumulate from daily traffic, and addressing them is a real share of the redecorating work.
- Lighting: Essential and difficult at once; the entry’s light has to flatter the space, hide its weaker corners and set the tone for the house beyond.
- Style Selection: Choosing a style that complements the rest of the home while making its own statement at the door.
- Budget: Homeowners balance the desire for high-quality materials and fixtures against the funds available.
