A mansard roof is a roof with two slopes on every side, the lower slope considerably steeper than the upper, and it takes its name from the French architect François Mansart, 1598 to 1666. In French, mansarde can also mean a room fitted under such a roof, with one wall following its slope. That steep lower slope holds a story inside the roof, which is how Paris added a floor on top of façades whose height its rules fixed, and under the 2024 International Residential Code a mansard attic larger than one-third of the story beneath it counts as a full story. The same split makes it two roofs in one: a steep face that asphalt shingles cover by the maker’s instructions once it passes 21:12, and a shallow top built to low-slope rules.

What Is The Mansard Roof?
The mansard’s closest relative is the gambrel roof, which has a lower steeper slope and an upper less steep one on each of its two sides. Two other names cover the same ground. By the dictionary definition, a French roof is a mansard roof whose sides are nearly perpendicular, while curb roof is used both ways: for the gambrel shape, with a ridge at the center and a double slope on each of its two sides, and more broadly for any roof with two slopes on each side, gambrel or mansard.


The illustration shows the gambrel shape, and the photograph a barn house featuring a gambrel roof, via Byler Barns and Backyards.
The mansard keeps the gambrel’s two slopes and adds them to the ends as well, the way a hip roof slopes on all four sides. That makes the mansard a hybrid of a gambrel roof and a hip roof, with the same two-slope profile on every side.
A mansard can be built with dormer windows or without them. Pierced with dormers, the mansard provides a spacious and economical attic story, and in French a mansard window is one made in the near-vertical part of a broken roof.

An aerial view of mansard rooftops along Boulevard Haussmann in Paris, via Wikipedia.
What Is the Difference Between a Mansard and a Gambrel Roof?
The difference between a mansard and a gambrel roof is the number of sloping sides, since a mansard has two slopes on all sides and the same profile on every side, while a gambrel has its two slopes on two sides only.
| Roof | Sides that slope | Shape of each sloping side |
|---|---|---|
| Mansard roof | Every side | Two slopes, the lower considerably steeper than the upper |
| Gambrel roof | Two sides | A lower steeper slope and an upper less steep one |
| Curb roof | Two sides, or every side | A double slope on each sloping side |
| Hip roof | Ends and sides | Sloping ends as well as sloping sides, four-sided |
Mansard, gambrel, curb and hip roofs compared by the sides that slope and the shape of each.
Is a Mansard a Floor or an Attic?
A mansard floor can count as a full story. Under the 2024 International Residential Code, as carried in the 2025 California Residential Code, Section R316.3, a habitable attic is considered a story above grade plane unless it meets all the conditions of the code’s exception, among them an area not greater than one-third of the floor area of the story below, or one-half where the dwelling has a fire sprinkler system, and a floor that does not extend beyond the exterior walls of the story below. The 2021 edition carried the same one-third and one-half limits as Section R326.3.
A true mansard’s near-vertical lower slope encloses a top floor close to the full footprint of the story below, so on a reading of the geometry it will usually exceed the one-third limit and count as a story, and the local building official makes the call. Paris shows the same geometry at work: on an apartment house on boulevard Saint-Michel, the mansard roof gains a story and encloses two levels, one of apartments and one of servants’ rooms.
Headroom is the second test, because the same code requires habitable space to have a ceiling height of not less than 7 feet, 2134 mm, and in a room with a sloped ceiling at least 5 feet, 1524 mm, over the required floor area, with not less than 50 percent of that area at 7 feet or more.
For larger buildings, the 2024 International Building Code, as carried in the 2025 California Building Code, defines an exterior wall as an enclosing wall with a slope of 60 degrees or greater with the horizontal plane, wording that takes in a mansard lower slope at that angle or steeper. Every section number follows the 2024 codes as carried in the 2025 California codes, and the edition a state or city has adopted, with its local amendments, is the one that governs a real project.
What Are the Types of Mansard Roof?
The traditional types of mansard roof are named by the shape of the lower slope, which can be straight-angled, convex, concave or even S-curved, all with or without dormers. The straight form is the one that can look like a gambrel in cross section, the high mansards of the Second Empire were often concave or convex, and the flat-top mansard came much later, from 1960.
- Straight mansard, with a straight-angled lower slope, the form that in cross section can look like a gambrel
- Convex mansard, with a lower slope that bows outward, common in the Second Empire style
- Concave mansard, with a lower slope that curves inward
- S-curved mansard, combining both curves in one lower slope
- A later variant, the flat-top mansard, has a steep mansard face with a flat or nearly flat roof behind it, the modern Mansard style of 1960 to 1985
What Are The Advantages Of Using A Mansard Roof?
Extra Attic Space
The mansard’s main advantage is attic space. Where a gable or hip roof slopes down to the floor, the near-vertical lower slope of a mansard keeps more of the loft’s interior floor above the 5-foot and 7-foot ceiling heights the residential code asks of habitable rooms, enough on many plans for a master bedroom, and dormers along that slope bring daylight in, which adds to the sense of space.
Easier Expandability
Adding a mansard is a recognized way to add a floor to an existing building: England’s National Planning Policy Framework counts the addition of mansard roofs among the ways to create homes in the airspace above existing buildings, and the mansard is generally suitable as a roof extension for a terrace of at least three buildings at least two stories tall with a parapet along the whole front. On a busy street the converted roof room needs sound insulation as well, one of the noise reduction strategies that carry over to a new top floor.
Aesthetical Value
The mansard’s look may have Classical roots, since its mostly horizontal profile was more in harmony with the Classical orders than steeper roofs, which may be why it was first used. On many 19th-century Gothic and Mansard roofs, slate in red, green, purple and blue-gray made decorative patterns. Looks are subjective, but where mansards are rare one that is well executed will stand out on its street.
What Are The Disadvantages Of Using A Mansard Roof?
Weather Resistance
Where the top of a mansard is nearly flat, it is a low-slope roof and has to be built as one. Under the 2024 International Residential Code, built-up, modified bitumen, single-ply and sprayed foam roofs need a design slope of at least 1/4 unit in 12 for drainage, and asphalt shingles are allowed only from 2:12, so once the top is flatter than 2:12 it cannot be shingled like the steep face.
The steep face has its own weak point. Very steep slopes reduce the effectiveness of factory-applied self-sealing adhesives, especially in colder climates and shaded areas, and nails placed too high can let the bottom layer of a laminated shingle slide off over time.
High Installation Costs
A mansard roof structure is two roofs in one, and each half has its own rules. On the steep face, the 2024 International Residential Code, Section R905.2.6, requires asphalt shingles steeper than 21:12 to follow the manufacturer’s approved installation instructions, and Owens Corning’s Oakridge shingle takes 6 fasteners and 4 spots of asphalt roof cement per shingle beyond 60 degrees, its mansard or steep slope fastening pattern. The shallow top can need a second covering, since slate is not allowed on slopes under 4:12.
Maintenance and Repair Costs
Repairs follow the same split, detail by detail. Under the same 2024 residential code, slate on the steep face is fixed with two fasteners per slate at a minimum headlap of 2 inches, 51 mm, at 20:12 or steeper. Every dormer adds cheek walls and flashings, which on mansards in Tower Hamlets’ Medway Conservation Area must be lead, while the low top depends on its drainage slope.
What Pitch Is a Mansard Roof?
A mansard’s pitch can be fixed by local planning rules. In London’s Medway Conservation Area, Tower Hamlets Council requires mansard roof extensions to have a lower slope of 70 degrees, about 33:12, and an upper slope of 30 degrees, about 6.9:12, finished in natural Welsh slate with lead flashings, and recommends a 900 mm set-back. That is one council’s rule for one conservation area of terraced houses.
The code’s shingle threshold is shallower than that lower slope. Beyond 21:12, a slope of 60.3 degrees that Owens Corning rounds to 60, the 2024 International Residential Code, Section R905.2.6, hands asphalt shingles to the maker’s instructions, so a 70-degree Medway face is past the point where the code sets the shingle rules itself. Slate is simpler there, needing only the 2-inch headlap the same code sets at 20:12 or steeper, and the 30-degree upper slope, about 6.9:12, still takes slate and asphalt shingles.
A History Lesson On Mansard Roofs
The roof’s origin is older than its name: although it is named for François Mansart, 1598 to 1666, others used it before him. The form appears as early as the mid-16th century in England and Italy, and Pierre Lescot, about 1515 to 1578, used it at the Louvre, which he began rebuilding in 1546 as a commission from Francis I. The English word comes from French mansarde, after Mansart, and the first known use of the word in English, with this roof meaning, dates to about 1734.
Mansart, important for establishing classicism in French Baroque architecture, made the roof his own. At Blois, which Gaston d’Orléans commissioned him to reconstruct in 1635, he used the high-pitched, two-sloped roof that bears his name, and the château of Maisons is his most complete surviving work. Even Britannica gives his château of Balleroy two dates, about 1626 in its biography of Mansart and about 1631 in its article on the mansard roof.
The roof became more fashionable still under Napoleon III, who reigned from 1852 to 1870. The public buildings of Baron Haussmann’s rebuilding of Paris between 1853 and 1870 share a high elevation with mansard roofs, and the mansard was particularly popular in the mid-19th century, especially in France and the United States. The style spread well beyond France, and Second Empire examples include the Opera House in Vienna, the Bank of Italy in Rome and the Reichstag building in Berlin.
Why Is Paris Full of Mansard Roofs?
Paris height rules help explain its mansards, because they tied the façade to the street and allowed a story inside the roof. The ordinance of 25 August 1784 and the decrees down to 1859 allowed a volume under an oblique line above the vertical façade, so that a sixth story built in the roof was added to the square stories.
The 1859 regulation added a rule for streets 20 meters wide or more, allowing façades of 20 meters with no more than five square stories above the ground floor, and buildings with their cornice at 20 meters and five straight stories shaped the image of Second Empire architecture.
| Date | Commission du Vieux Paris | APUR, 1975 |
|---|---|---|
| 1784, late 18th century | 22.4 m, 73.5 ft | Near 20 m, 65.6 ft, on the main streets |
| 1859 | No figure given | 25 m, 82.0 ft, on streets 20 m or wider |
| 1884 | 28.5 m, 93.5 ft | Up to 28 m, 91.9 ft |
| 1902 | 31 m, 101.7 ft | Slightly above 30 m, 98.4 ft |
Maximum building heights in Paris, by the Commission du Vieux Paris and by APUR. The two differ at every date for which both give a figure. Feet are conversions at exactly 0.3048 m to the foot.
Second Empire Mansards in America
In the United States the Second Empire style peaked roughly from 1855 to 1885 and faded quickly after the panic of 1873. The State, War, and Navy Department Building in Washington, D.C., by Alfred B. Mullett, now the Eisenhower Executive Office Building, is an American example whose style is characterized by a steep mansard roof. Its dates differ by source, 1871 to 1875 in Britannica and 1871 to 1888 in an archived White House history.

The Arnold Constable & Company building at Fifth Avenue and 19th Street, built in 1868 to designs by Griffith Thomas, via Ephemeral New York.
The mansard came back between 1960 and 1985, peaking in the late 1970s, as the Mansard style, a steep mansard face that extends to the top of the first floor with a flat or nearly flat roof behind it, found on houses, duplexes, apartment complexes, office buildings, restaurants, medical facilities and gas stations and used to update downtown commercial buildings.
Conclusion
A mansard roof’s pros and cons are two sides of one trade. It buys a top floor close to the full footprint, which the residential code will often treat as a story, at the cost of a steep face and a shallow top that each follow their own rules. It is also a piece of architectural heritage, and whether it is the right choice for a home depends on the region’s climate, the code edition the jurisdiction has adopted and, in conservation areas, local design rules such as the Medway guidelines.
Related Articles

This was a very educational studied on Mansard Roofing system, we purchase an Queen Ann property in Reading PA with a Mansard Design which is a chore to repair and costly.